Molybdenum carbides melting temperatures

As noted above, the range of fibers employed does not precisely overlap with those employed for organic composites. Because the formation of the MMCs generally requires melting of the metal-matrix, the fibers need to have some stability to relatively high temperatures. Such fibers include graphite, silicon carbide, boron, alumina-silica, and alumina fibers. Most of these are available as continuous and discontinuous fibers. It also includes a number of thin metal wires made from tungsten, titanium, molybdenum, and beryllium. 

Interstitial nitrides are similar to interstitial carbides in structure and composition, and the two groups of materials closely resemble each other. The nitrides however are not as refractory. In fact, only the nitrides of Group IV and V have melting points above 1800°C. Those of Group VI, i.e., chromium, molybdenum, and tungsten nitrides, have lower melting (or decomposition) points and dissociate rapidly into N2 and the pure element at high temperature ( 1000"C). Their chemical stability is relatively poor and they do not therefore meet the refractory criteria. They are mentioned in this chapter for reference purposes. 

Nickel-based alloys, which form the bulk of alloys produced, are basically nickel-chrome alloys with a face-centered cubic solid-solution matrix containing carbides and the coherent intermetallic precipitate y-NijlAfTi). This latter precipitate provides most of the alloy strengthening and results in useful operating temperatures up to 90% of the start of melting. Further additions of aluminum, titanium, niobium, and tantalum are made to combine with nickel in the y phase, and additions of molybdenum, tungsten, and chromium strengthen the solid solution matrix. 

---