Molar yield coefficient

The product yield coefficient can then be calculated, taking into account the relative numbers of carbons in the substrate and product. The molar yield coefficient is then written as... 

Fig. 11 Molar yield coefficient Y of immobilizate at different acceptor/substrate ratios for the enzyme-coimmobilizate (DSR-S and DN) and DSR-S...

Despite the above-mentioned short-comings, this approach to the estimation of those deoxy sugars which yield malonaldehyde when oxidized with periodate, seemed promising, since, as has been seen (58,59), the dye is formed quantitatively in the reaction of malonaldehyde with 2-thiobarbituric acid also, more recently, its constitution (49,57) and molar extinction coefficient (36) have been established. Thus, if conditions could be found in which malonaldehyde, while being formed quantitatively from the deoxy sugars, would be stable, an ideal method, independent of standard compounds, would be available for the quantitative determination of all of these sugars. 

Properties of luciferin. The crystals are microscopic needles, which melt with decomposition at 205-210°C (Bitler and McElroy, 1957). It is a quite stable luciferin compared with some other luciferins, such as Cypridina luciferin and the luciferins of krill and dinoflagellates. It is not significantly affected by lOmM H2SO4 and lOmM NaOH at room temperature in air. The absorption spectral data of luciferin are shown in Fig. 1.3 (McElroy and Seliger, 1961). The molar absorption coefficient of the 328 nm peak in acidic solutions and that of the 384 nm peak in basic solutions are both 18,200 (Morton et al., 1969). Luciferin is fluorescent, showing an emission maximum at 537 nm in both acidic and basic conditions, although the intensity of the fluorescence is lower in acidic solution than in basic solution (fluorescence quantum yields 0.62 in basic condition, and 0.25 in acidic condition Morton et al., 1969). The chemical synthesis... 

Fluorescence emission maximum Fluorescence quantum yield Molar absorption coefficient (e) at peak wavelengths (as monomer)... 

A-T ax are the spectral maximum of UV-Vis absorption, emission, and triplet state absorption, respectively, is the molar extinction coefficient, ta and Tt, Oa and r, s and Et, are the lifetime, quantum yield, and energy content of the singlet and triplet excited states of RF, respectively. 

One cm3 of the reactant/product/catalyst mixture was sampled periodically during the reaction for the transmission infrared analysis (Nicolet Magna 550 Series II infrared spectrometer with a MCT detector). The concentrations of reactants and products were obtained by multiplying integrated absorbance of each species by its molar extinction coefficient. The molar extinction coefficient was determined from the slope of a calibration curve, a plot of the peak area versus the number of moles of the reagent in the IR cell. The reaction on each catalyst was repeated and the relative error for the carbamate yield measured by IR is within 5%. 

Fluorophores containing 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene as a core skeleton are commonly designated as BODIPY fluorophores. Due to their useful photophysical properties including high fluorescence quantum yields, high molar absorption coefficient, narrow absorption and emission band width, and their high photostability [50], BODIPY dyes are proven to be extremely versatile and useful in many biological applications Fig. 11 [68]. 

The intensity of absorption gives the product G , where G is the observed yield and is the molar extinction coefficient. The absolute value of was determined by Fielden and Hart (1967) using an H2-saturated alkaline solution and an alkaline permanganate-formate solution, where all radicals are converted into Mn042. They thus obtained = 1.09 x 104 M- cm1 at 578 nm, which is almost identical with that obtained by Rabani et al. (1965), who converted the hydrated electron into the nitroform anion in a neutral solution of tetrani-tromethane. From the shape of the absorption spectrum and the absolute value of at 578 nm, one can then find the absolute extinction coefficient at all wavelengths. In particular, at the peak of absorption, (720)/ (578) = 1.7 gives at 720 nm as 1.85 X 104 M 1cm 1. 

So a broad overview of ink technology shows how the intensity of colour (its absorbance) is a function of three variables molar absorption coefficient s, path length l and chromophone concentration c. We have already met Beer s and Lambert s laws. We now combine the two to yield the Beer-Lambert Law ... 

With 0 the quantum yield, e the molar absorption coefficient, d the optical depth, and k a constant account for the fact that only a small fraction of emission can be observed. 

The electronic spectrum of the fractions containing the pure tridehydro [18]annulene exhibits the strongest absorption maximum (in benzene) at 342 nm. (e 155,000) and the spectroscopic yield, based on the molar extinction coefficient, is 1.17 g. (2.40% from 1,5-hexadiyne). The yield of tridehydro[18]annulene in the mixed fractions, based on the 342 nm. maximum,is 0.27g.(0.55%). The tridehydro [18]annulene is best stored in solution in the refrigerator. 

---