Elastomer blends, miscible reactive elastomers

E-EA-GMA (see Table 14.3) and EEA are often used in combination as a toughening system. The optimum blend ratio of reactive elastomers non-reactive elastomers (e.g. Lotader Lotryl) is 30/70. Since the E-EA-GMA terpolymer and EEA copolymer are mutually miscible, when blended together with PET the mixture acts as a single elastomeric phase, which is interfacially grafted to the PET continuous phase. 

In bromobutyl/chlorobutyl rubber blends, both elastomers have the polyisobutylene backbone and halogen reactive functionality. These polymers, being molecularly miscible, constitute an ideal system for co-vulcanization. Bromobutyl and chloro-butyl can be used interchangeably without significant effect on state of cure as measured by extension modulus, tensile strength, and cure rheometer torque development. Bromobutyl will increase the cure rate of a blend with chlorobutyl. However, where bromobutyl is the major part of the blends, chlorobutyl does not reduce scorch tendencies because the more reactive halogen unit can dominate. 

---