Methanol electrooxidation oxygen reduction reaction

Different electron-conducting polymers (polyaniline, polypyrrole, polythiophene) are considered as convenient substrates for the electrodeposition of highly dispersed metal electrocatalysts. The preparation and the characterization of electronconducting polymers modified by noble metal nanoparticles are first discussed. Then, their catalytic activities are presented for many important electrochemical reactions related to fuel cells oxygen reduction, hydrogen oxidation, oxidation of Cl molecules (formic acid, formaldehyde, methanol, carbon monoxide), and electrooxidation of alcohols and polyols. 

In the above reactions, the oxidation process takes place in the anode electrode where the methanol is oxidized to carbon dioxide, protons, and electrons. In the reduction process, the protons combine with oxygen to form water and the electrons are transferred to produce the power. Figure 9-1 is a reaction scheme describing the probable methanol electrooxidation process (steps i-viii) within a DMFC anode [1]. Only Pt-based electrocatalysts show the necessary reactivity and stability in the acidic environment of the DMFC to be of practical use [2], This is the complete explanation of the anodic reactions at the anode electrode. The electrodes perform well due to the presence of a ruthenium catalyst added to the platinum anode (electrode). Addition of ruthenium catalyst enhances the reactivity of methanol in fuel cell at lower temperatures [3]. The ruthenium catalyst oxidizes carbon monoxide to carbon dioxide, which in return helps methanol reactivity with platinum at lower temperatures [4]. Because of this conversion, carbon dioxide is present in greater quantity around the anode electrode [5]. 

In the case of direct methanol fuel cells, compared with oxygen reduction, methanol oxidation accounts for the main activation loss because this process involves six-electron transfer per methanol molecule and catalyst self-poison when Pt alone was used from the adsorbed intermediate products such as COads-From the thermodynamic point of view, methanol electrooxidation is driven due to the negative Gibbs free energy change in the fuel cell. On the other hand, in the real operation conditions, its rate is obviously limited by the sluggish reaction kinetics. In order to speed up the anode reaction rate, it is necessary to develop an effective electrocatalyst with a high activity to methanol electrooxidation. Carbon-supported (XC-72C, Cabot Corp.) PtRu, PtPd, PtW, and PtSn were prepared by the modified polyol method as already described [58]. Pt content in all the catalysts was 20 wt%. 

---