Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Metathesis with tungsten catalysts

The third route involves metathesis polymerization of cyclooctatetraene with tungsten catalysts, yielding polyacetylene as an insoluble film along with oligomers (iOi). By first polymerizing cyclooctene and then adding cyclooctatetraene, a soluble, red block copolymer was obtained. On the basis of the visible absorption spectrum, at least two or three cyclooctatetraene units were concluded to have been added to the polymer chain forming a short polyacetylene block. No conductivity data were reported for this copolymer. [Pg.289]

The report by Basset and co-workers on the metathesis of sulphur-containing alkenes using a tungsten alkylidene complex, mentioned previously for the acyclic cross-metathesis reaction (see Sect. 2.2), also contained early examples of ring-opening cross-metathesis of functionalised alkenes [20]. Allyl methyl sulphide was reacted with norbornene in the presence of the tungsten catalyst 5, to yield the desired ring-opened diene 35 (Eq. 29). [Pg.182]

When alkenes are allowed to react with certain catalysts (mostly tungsten and molybdenum complexes), they are converted to other alkenes in a reaction in which the substituents on the alkenes formally interchange. This interconversion is called metathesis 126>. For some time its mechanism was believed to involve a cyclobutane intermediate (Eq. (16)). Although this has since been proven wrong and found that the catalytic metathesis rather proceeds via metal carbene complexes and metallo-cyclobutanes as discrete intermediates, reactions of olefins forming cyclobutanes,... [Pg.137]

Upon discovery of this mechanism, new catalysts have been developed, now presenting alkylidene ligands in the metal coordination sphere, such as [(=SiO) Ta(=CH Bu)Np2 and [(=SiO)Mo(=NAr)(=CH Bu)Np] [43, 88]. Table 11.4 presents results obtained with several catalysts prepared by SOMC. Although [(=SiO) Ta(CH3)3Cp (=SiOSi=)] is not active in alkane metathesis (the tantalum site would not be as electrophilic as required) [18], results obtained with [(=SiO)Mo(=NAr) (=CH Bu)Np] show that ancillary ligands are not always detrimental to catalytic activity this species is as good a catalyst as tantalum hydrides. Tungsten hydrides supported on alumina or siHca-alumina are the best systems reported so far for alkane metathesis. The major difference among Ta, Mo and W catalysts is the selectivity to methane, which is 0.1% for Mo and less than 3% for W-based catalysts supported on alumina, whereas it is at least 9.5% for tantalum catalysts. This... [Pg.432]

This mechanism was later confirmed experimentally in 1981 by Schrock and others, who reported the first example of alkyne metathesis by tungsten(vi)-alkylidyne complex. They have prepared tungsten alkylidyne complex 120 (Equation (21)) and found that it reacts with diphenylacetylende to give tungsten alkylidyne complex 121 and another alkyne 122 (lequiv.) (Equation (22)). Furthermore, complex 121 works as a catalyst for the alkyne metathesis reaction. [Pg.301]

In die last 10 years or so an exciting new strategy has emerged for the formation of carbon-carbon double bonds, namely olefin metathesis. This work grew out of the development of Ziegler-Natta catalysts for die polymerizarion of cyclic olefins. It was found that when 2-pentene was treated with a catalyst prepared from tungsten hexachloride and ethylaluminum dichloride, a mixture of 2-pentene, 2-butene, and 3-hexene was produced in minutes at room temperature (rt) ... [Pg.256]

Ring-closing metathesis is not limited to olefins. Catalysts promoting ring closure of alkynes [20] have also been developed (Scheme 9). Alkyne 56 can easily be converted into cyclic alkyne 57 with a yield of 73 %. For this purpose, a tungsten catalyst has been used. [Pg.95]

While molybdenum and tungsten catalysts are associated with metathesis polymerization (see Organic Synthesis Using Metal-mediated Metathesis Reactions), chromium catalysts are widely used in the production of polymers. The best-known system is the so-called Phillips catalyst, Cp2Cr (see... [Pg.3210]

Only two reports have appeared on the formation and properties of linear unsaturated polycarbostannanes and this is a fruitful area for continued study. Such materials have been synthesized by acylic diene metathesis (ACDMET) of bis(4-pentenyl)dibutyltin either with Schrock s Mo-alkylidene, Mo(=CHMe2Ph)( A-2,6-C6H3 - i -Pr2)(OCMe(CF3 )2)2, or with the aryloxo-tungsten catalyst W(0)Cl2(0-2,6-C6H3-Br2)2, Equation 3.8.8). ... [Pg.387]

Several early attempts at ADMET polymerization were made with classical olefin metathesis catalysts [57-59]. The first successful attempt was the ADMET polymerizations of 1,9-decadiene and 1,5-hexadiene with the WClg/EtAlf l,. catalyst mixture [60]. As mentioned in the introduction, the active catalytic entities in these reactions are ill-defined and not spectroscopically identifiable. Ethylene was trapped from the reaction mixture and identified. In addition to the expected ADMET polymers, intractable materials were observed, which were presumed to be the result of vinyl polymerization of the diene to produce crosslinked polymer. Addition to double bonds is a common side reaction promoted by classical olefin metathesis catalysts. Indeed, reaction of styrene with this catalyst mixture and even wifh WCl, alone led to polystyrene. Years later, classical catalysts were revisited in fhe context of producing tin-containing ADMET polymers wifh tungsten phenoxide catalysts [61], Alkyl tin reagents have long been known to act as co-catalysts in classical metathesis catalyst mixtures, and in this case the tin-containing monomer acted as monomer and cocatalyst [62]. Monomers with less than three methylene spacers between the olefin and tin atoms did not polymerize (Scheme 6.14). [Pg.203]

A W03/S102 catalyst can be promoted by adding minor amounts of elemental Na, S, Si, Mg, Ba, Zn, Sb, or W to the catalyst, and treating the admixture at elevated temperatures under inert atmosphere (Banks 1985). The enhanced effect is attributed to a partial reduction of the supported tungsten catalyst by the additive. Combination of W03/Si02 with MgO produces a dramatic increase in its metathesis activity, possibly caused by allyl radicals generated on the surface of... [Pg.102]


See other pages where Metathesis with tungsten catalysts is mentioned: [Pg.430]    [Pg.254]    [Pg.358]    [Pg.338]    [Pg.339]    [Pg.306]    [Pg.628]    [Pg.628]    [Pg.704]    [Pg.488]    [Pg.7]    [Pg.19]    [Pg.350]    [Pg.387]    [Pg.418]    [Pg.280]    [Pg.281]    [Pg.207]    [Pg.1576]    [Pg.1118]    [Pg.236]    [Pg.12]    [Pg.110]    [Pg.114]    [Pg.116]    [Pg.118]    [Pg.121]    [Pg.1118]    [Pg.360]    [Pg.103]    [Pg.111]    [Pg.141]    [Pg.277]    [Pg.355]    [Pg.385]   
See also in sourсe #XX -- [ Pg.1216 ]




SEARCH



Metathesis catalysts

Tungsten catalysts

Tungsten catalysts catalyst

Tungsten metathesis

Tungsten with

© 2024 chempedia.info