Double-mechanical seal

Fig. 12. Arrangements of mechanical seals. Double seal higher pressure fluid between seals creates an artificial environment for seal operation. Tandem seal two single seals with a buffer zone in between them. One backs up the other.

Double mechanical seal Double mechanical seal with steam flush... 

Stuffing Box. Stuffing box shall he suitable for packing, single (inside or outside) or double-inside mechanical seal without modifications. Stuffing box shall he accurately centered by machined rabbit fits on case and frame adapter. 

Stuffing Box with Mechanical Seal. Mechanical seal shall he of the (single inside) (single outside) (double inside) (cartridge) type and (balanced) (unbalanced). 

Use double or tandem mechanical seal with inert seal fluid... 

The bearings are W ater lubricated. The typical materials of construction are carbon, copper alloys, bakelite and ceramics. The mechanical seals, like a double oil seal protected w ith a cap called a Sand Guard, are robust and perfect in sealing the inotor to prevent the entry of pumped... 

First, one pump running in a parallel system tends to suffer from cavitation because operation to the right of the BF.P indicates that the NPSHr of the pump rises drastically. To survive this condition, you should use dual mechanical seals on these pumps. Dual or double mechanical seals can withstand cavitation better than a single seal. There is a discussion on this in the mechanical seal chapter of this book. Many engineers perceive that parallel pumps are problematic becau.se they appear to suffer a lot of premature seal failure. Parallel pumps deserve double seals even if it s only a cold water system. 

To this day, balanced mechanical seals using o-rings are the standard in industry. Meehanical seals eontinue to evolve in sealing face technology, computer design, finite element analysis, cartridge designs, split seals, double or dual seals, and dry gas seals. 

There are trade-offs for magnetic drive and canned pumps versus centrifugal pumps with double-mechanical seals. The former have no seals to leak, but need active interlocks to prevent high temperature for temperature sensitive materials. Similarly, diaphragm pumps, that have... 

The leak size can be reduced by using double mechanical seals or a mechanical seal and a throttle bush, the space between the two being vented to a safe place. Major leaks may still occur, however, due to collapse of the bearing or seal. LFG pumps should therefore be fitted with emergency isolation valves (see Section 7.2.1), particularly if the temperature is low or the inventory that can leak out is high. 

Figure 3-31A. Typical seal flush arrangement for double mechanical seals.

Figure 3-31C. Double mechanical seal, two rotary elements against common stationary. (By permission, Fischer, E. E., Chem Processing, Oct. 1983 [24].)...

PROCESS INDUSTRY REQUIREMENT DOUBLE MECHANICAL SEAL... 

Figure 6-46C. Double mechanical seal used for special gas sealing requirements in Figure 6-46A, and substitutes for the single seal of Figure 6-46B. By permission, Roots Division, Dresser Industries, Inc.

Double Mechanical Seals With All Parts Accessible Without Removing the Drive... 

Where it is necessary to prevent any leakage of fluid to the atmosphere, a double mechanical seal is used. The space between the two seals is flushed with a harmless fluid, compatible with the process fluid, and provides a buffer between the two seals. 

The standard pressurized dual mechanical seal (previously referred to as a double mechanical seal) shall be... 

FIG. 10-113 Internal bellows-type double mechanical seal. 

Figure 7.13. Types of seals for pump shafts, (a) Packed stuffing box the sealing liquid may be from the pump discharge or from an independent source, (b) Water cooled stuffing box. (c) Internal assembly mechanical seal the rotating and fixed surfaces are held together by the pressure of the pump liquid which also serves as lubricant a slight leakage occurs, (d) Double mechanical seal with independent sealing liquid for handling toxic or inflammable liquids.

A substantially new and critical feature in bottom-entering agitators is the sealing of the shaft double mechanical seals are used here. On modem designs, they are provided with additional standstill seals for emergencies. The standstill seal allows the mechanical seal to be replaced while the reactor is full and under pressure. In a number of polymerizations, particularly in vinyl-chloride polymerization, the rotating elements must be protected by additional water flushing (4) other-... 

Fig. 11. Double mechanical seal accessories Pressurized thermal convection system with liquid level switch and 1-gal ASME vessel.

---