Manufacturing methods solution mixing

Of the various forming methods available, mix extrusion and compaction-then-insertion are the two used most widely. On the other hand, there is a wide variety of techniques for mixing. The most popular methods are Cement -style mixers and rotary mullor mixers. Both techniques offer the ability to manufacture large quantities of mix in relatively short times and minimize the shearing effect upon the carbon black, which reduces its ability to hold solution. 

There are several processing methods available to manufacture polymer/ CNTs nanocomposites. It may be considered essentially three methods to incorporate CNTs into polymeric matrices 1) solution mixing or film casting of suspensions of CNTs in soluble polymers 2) in situ polymerization of CNT-monomer polymer mixture and 3) melt mechanical mixing of CNTs with polymer. 

In general, aqueous ophthalmic solutions are manufactured by methods that call for the dissolution of the active ingredient and all or a portion of the excipients into all or a portion of the water and the sterilization of this solution by heat or by sterilizing filtration through sterile depth or membrane filter media into a sterile receptacle. If incomplete at this point, this sterile solution is then mixed with the additional required sterile components, such as previously sterilized solutions of viscosity-imparting agents, preservatives, and so on, and the batch is brought to final volume with additional sterile water. 

Trinitrobenzene is present in crude TNT manufactured by mixed acid nitration and results from methyl group oxidation followed by decarboxylation." In fact, a convenient method for the synthesis of 1,3,5-trinitrobenzene involves oxidation of 2,4,6-trinitrotoluene with a solution of sodium dichromate in sulfuric acid, followed by decarboxylation of the resulting 2,4,6-trinitrobenzoic acid in boiling water." 1,3,5-Trinitrobenzene is prepared from 2,4,6-trinitro-m-xylene by a similar route." 2,4,6-Trinitroanisole can be prepared from the... 

---