Magic angle effect

In their study of the NMR T2 and T2 of crosslinked cis-polyisoprene sheets under extension, von Meerwall and Ferguson 65) found that T2 of the rubber had much smaller anisotropy ( magic angle effect) than that of trace penetrants at the same extension ratio X < 3. However, the penetrant diffusion (referred to the strained dimensions) was within experimental error isotropic these findings are equally valid for C6F6 and n-hexadecane as penetrant. The authors concluded that segment orien-... 

An explanation for this magic-angle effect has been given by Osada [261]. He considered the following -direction linearized energy dispersion near the Fermi level... 

The Lebed oscillations (or magic angle effect), on the other hand, are observed in materials with ID FS sheets as AMRO for rotations of the field perpendicular to the highly conducting direction. These oscillations, however. 

Disadvantages. The magic angle must be extremely stable and accurately set. The spiiming speed must show good stability over the duration of the experiment. The probe needs to be accurately tuned and careful correction for irradiation and detection variations with frequency, and baseline effects are necessary. The gain... 

If j Rf is exactly the magic angle and infinite spinning speed is assumed, the first-order anisotropic terms are zero for both single and DQ coherence (33). This does not hold true for finite spinning speed, but a complete averaging of the first-order effect occurs at the exact rotor cycles. Therefore, the x evolution time has to match exactly a multiple of the rotor period. The second-order anisotropy refocusing occurs for... 

---