Macroporous materials, IUPAC definition

Pores are found in many solids and the term porosity is often used quite arbitrarily to describe many different properties of such materials. Occasionally, it is used to indicate the mere presence of pores in a material, sometimes as a measure for the size of the pores, and often as a measure for the amount of pores present in a material. The latter is closest to its physical definition. The porosity of a material is defined as the ratio between the pore volume of a particle and its total volume (pore volume + volume of solid) [1]. A certain porosity is a common feature of most heterogeneous catalysts. The pores are either formed by voids between small aggregated particles (textural porosity) or they are intrinsic structural features of the materials (structural porosity). According to the IUPAC notation, porous materials are classified with respect to their sizes into three groups microporous, mesoporous, and macroporous materials [2], Microporous materials have pores with diameters < 2 nm, mesoporous materials have pore diameters between 2 and 50 nm, and macroporous materials have pore diameters > 50 nm. Nowadays, some authors use the term nanoporosity which, however, has no clear definition but is typically used in combination with nanotechnology and nanochemistry for materials with pore sizes in the nanometer range, i.e., 0.1 to 100 nm. Nanoporous could thus mean everything from microporous to macroporous. 

According to the IUPAC definition, porous materials ate divided into three different classes, depending on their pore sizes. Mesoporous materials are described as materials whose pore diameters lie in the range between 2 and 50 nm. Solids with a pore diameter below 2 nm or above 50 nm belong to the class of micro- and macroporous materials, respectively. 

Silica is one of the most abundant chemical substances on earth. It can be both crystalline or amorphous. The crystalline forms of silica are quartz, cristobalite, and tridymite [51,52]. The amorphous forms, which are normally porous [149] are precipitated silica, silica gel, colloidal silica sols, and pyrogenic silica [150-156], According to the definition of the International Union of Pure and Applied Chemistry (IUPAC), porous materials can be classified as follows microporous materials are those with pore diameters from 3 to 20 A mesoporous materials are those that have pore diameters between 20 and 500 A and macroporous materials are those with pores bigger than 500 A [149],... 

The terminology is not yet homogeneous. The use of the prefix nano spread out in the 1990s. Until then, the common term used to be mesoscopic structures, which continues to be used. According to a definition by IUPAC of 1985, the following classification applies to porous materials microporous, < 2 nm pore diameter mesoporous, 2-50 nm macroporous, > 50 nm. 

Relatively straightforward is the definition of nanoscopic voids. Nanopores and nanocavities are elongated voids or voids of any shape, and nanomaterials can incorporate especially nanopores in an ordered or disordered way. The former is of crucial importance for many of the hybrid materials discussed in the book (e.g., in Chapters 16 or 18). Nanochannel is also frequently used instead of nanopore, often in biological or biochemical contexts. Besides nanoporous, the term mesoporous is often found in hybrid materials research. Interestingly, the IUPAC has defined the terms mesoporous (pores with diameters between 2 and 50 nm), microporous (pores with diameters <2 nm) and macroporous (pores with diameters >50 nm), yet has not given a definition of nanoporous in the IUPAC Recommendations on the Nomenclature of Structural and Compositional Characteristics of Ordered Microporous and... 

---

See also in sourсe #XX -- [ , ]

---