Lithium diisopropylamide addition

In general the reaction of an aldehyde with a ketone is synthetically useful. Even if both reactants can form an enol, the a-carbon of the ketone usually adds to the carbonyl group of the aldehyde. The opposite case—the addition of the a-carbon of an aldehyde to the carbonyl group of a ketone—can be achieved by the directed aldol reaction The general procedure is to convert one reactant into a preformed enol derivative or a related species, prior to the intended aldol reaction. For instance, an aldehyde may be converted into an aldimine 7, which can be deprotonated by lithium diisopropylamide (EDA) and then add to the carbonyl group of a ketone ... 

Good yields are usually obtained with aromatic aldehydes or ketones. Aliphatic aldehydes are poor substrates for the ordinary procedure, but react much better if the halo ester is first deprotonated with lithium diisopropylamide (LDA) in tetrahydrofuran at -78 °C, prior to addition of the aldehyde. 

Alpha hydrogen atoms of carbonyl compounds are weakly acidic and can be removed by strong bases, such as lithium diisopropylamide (LDA), to yield nucleophilic enolate ions. The most important reaction of enolate ions is their Sn2 alkylation with alkyl halides. The malonic ester synthesis converts an alkyl halide into a carboxylic acid with the addition of two carbon atoms. Similarly, the acetoacetic ester synthesis converts an alkyl halide into a methyl ketone. In addition, many carbonyl compounds, including ketones, esters, and nitriles, can be directly alkylated by treatment with LDA and an alkyl halide. 

In addition to their behavior as bases, primary and secondary amines can also act as very weak acids because an N-H proton can be removed by a sufficiently strong base. We ve seen, for example, how diisopropylamine (pK-A 40) reacts with butyilithium to yield lithium diisopropylamide (LDA Section 22.5). Dialkylamine anions like LDA are extremely powerful bases that are often used... 

Interestingly, treatment of bicyclic imidate 5 (R = OMe) with lithium diisopropylamide at — 78 C, followed by addition of iodomethane and quenching into ammonium chloride solution, gives 2-methoxy-3-methyl-37/-azepine. In the absence of iodomethane, 2-methoxy-3i/-azepine (6, R = OMe) is produced. Rearrangement of the lithiated bicycle to a lithiated 2-methoxy-3//-azepine, followed by regioselective trapping by the electrophile, is the most likely mechanistic rationale. 

Several reviews cover hetero-substituted allyllic anion reagents48-56. For the preparation of allylic anions, stabilized by M-substituents, potassium tm-butoxide57 in THF is recommended, since the liberated alcohol does not interfere with many metal exchange reagents. For the preparation of allylic anions from functionalized olefins of medium acidity (pKa 20-35) lithium diisopropylamide, dicyclohexylamide or bis(trimethylsilyl)amide applied in THF or diethyl ether are the standard bases with which to begin. Butyllithium may be applied advantageously after addition of one mole equivalent of TMEDA or 1,2-dimethoxyethane for activation when the functional groups permit it, and when the presence of secondary amines should be avoided. 

Very high levels of induced diastereoselectivity are also achieved in the reaction of aldehydes with the titanium enolate of (5)-l-rerr-butyldimethylsiloxy-1-cyclohexyl-2-butanone47. This chiral ketone reagent is deprotonated with lithium diisopropylamide, transmetalated by the addition of triisopropyloxytitunium chloride, and finally added to an aldehyde. High diastereoselectivities are obtained when excess of the titanium reagent (> 2 mol equiv) is used which prevents interference by the lithium salt formed in the transmetalation procedure. Under carefully optimized conditions, diastereomeric ratios of the adducts range from 70 1 to >100 1. 

Stereodivergent aldol addition is also possible when (.S,)-5,5-dimethyl-4-trimethylsiloxy-3-hexanonc (16) is chosen as the enolate precursor. Thus, the lithium enolate generated from 16 by treatment with lithium diisopropylamide and tetramethylethylenediamine leads predomi-... 

The induced stereoselectivity in these aldol additions with (///S)-2Tiydroxy-l,2,2-triphenylethyl acetate is improved by the use of an excess of base (e.g.. 3 equiv of lithium diisopropylamide or lithium hexamethyldisilazane) in the deprotonation step89. 

A modification of the addition of (+ )-(/ )-4-methyl-l-(methylsulfinyl)benzenc to benzaldehyde was recently reported9. The sulfinyl anion is made with lithium diisopropylamide, transmeta-lated with zinc(II) chloride and then reacted with benzaldehyde. 

Formation of a-Sulfinyl Anions with Lithium Diisopropylamide and Subsequent Addition to a,/ -Unsaturatcd Ketones General Procedure1 ... 

When the enolate of an ,) - or a /j,y-unsatunited amide is used, it can react in an a or in a y fashion with a,/i-unsaturated esters, however, in most cases only a-selectivity is observed. Using l-(l-oxo-2-butenyl)pyrrolidine and lithium diisopropylamide at — 78 °C in a THF/HM-I A mixture (1 1), high. syn-selective formation of 3-alkyl-5-oxo-5-(l-pyrrolidinyl)-4-vinylpen-tanoates is achieved78,381 382. Related syn- or anti-selective additions of a vinylogous urethane also are known79. 

When 2,2-dimethylpropanal is used to prepare the azomethine moiety, the corresponding azaallyl anion may be obtained when l,8-diazabicyclo[5.4.0]undec-7-ene/lithium bromide is used as base. The subsequent addition to various enones or methyl ( )-2-butenoate proceeds with anti selectivity, presumably via a chelated enolate. However, no reaction occurs when triethylamine is used as the base, whereas lithium diisopropylamide as the base leads to the formation of a cycloadduct, e.g., dimethyl 5-isopropyl-3-methyl-2,4-pyrrolidinedicarboxylate using methyl ( )-2-butenoate as the enone84 89,384. 

An excellent synthetic method for asymmetric C—C-bond formation which gives consistently high enantioselectivity has been developed using azaenolates based on chiral hydrazones. (S)-or (/ )-2-(methoxymethyl)-1 -pyrrolidinamine (SAMP or RAMP) are chiral hydrazines, easily prepared from proline, which on reaction with various aldehydes and ketones yield optically active hydrazones. After the asymmetric 1,4-addition to a Michael acceptor, the chiral auxiliary is removed by ozonolysis to restore the ketone or aldehyde functionality. The enolates are normally prepared by deprotonation with lithium diisopropylamide. 

The imines of ( )-(l/ ,2/ ,5/ )-2-hydroxy-3-pinanone and glycine, alanine and norvaline methyl esters were highly successful as Michael donors in the asymmetric synthesis of 2,3-di-substituted glutamates. The chiral azaallyl anions derived from these imines by deprotonation with lithium diisopropylamide in THF at — 80 "C undergo addition to various ,/ -unsaturated esters with modest to high diastereoselectivities210,394. 

Oxo esters are accessible via the diastereoselective 1,4-addition of chiral lithium enamine 11 as Michael donor. The terr-butyl ester of L-valine reacts with a / -oxo ester to form a chiral enamine which on deprotonation with lithium diisopropylamide results in the highly chelated enolate 11. Subsequent 1,4-addition to 2-(arylmethylene) or 2-alkylidene-l,3-propanedioates at — 78 °C, followed by removal of the auxiliary by hydrolysis and decarboxylation of the Michael adducts, affords optically active -substituted <5-oxo esters232 (for a related synthesis of 1,5-diesters, see Section 1.5.2.4.2.2.1.). In the same manner, <5-oxo esters with contiguous quaternary and tertiary carbon centers with virtually complete induced (> 99%) and excellent simple diastereoselectivities (d.r. 93 7 to 99.5 0.5) may be obtained 233 234. 

Alkylation of 220 was achieved by treatment with lithium diisopropylamide (LDA) followed by addition of an appropriate alkyl halide. Decyanation of compound 221 was achieved using Li/NH3, to give compound 222 in 66%... 

Nearly quantitative generation of l,3-bis(methylthio)allyllithium was proved, as this solution yielded l,3-bis(methyIthio)propene (88-89%) and l,3-bis(methylthio)-l-butene (89%) by reaction with methanol and methyl iodide, respectively. The checkers found that lithium diisopropylamide can be replaced by w-butyllithium without any trouble for the generation of l,3-bis(methylthio)allyllithium, simplifying the procedure considerably at least in this particular case. Subsequent reaction with propionaldehyde gave l,3-bis(methylthio)-l-hexen-4-ol in 85% yield, and no appreciable amount of by-product, such as the addition product of w-hutyllithium with propionaldehyde or with the intermediate 1.3-bis(methylthio)propene, was formed. 

Reaction of Me3GeCl with a substituted cyclopropene in the presence of lithium diisopropylamide (LDA) yields different products depending on the order of addition of the reagents.97 Addition of LDA to a mixture of the reactants gives the dimetallated cyclopropene (Equation (76)). Dilithiation of the cyclopropane followed by addition of Me3GeCl gives the allene (Equation (77)). 

The diastereoselective formation of dienol tricarbonyliron complexes on treating rf-2,4-pentadienal)Fe(CO)3 with functionalized zinc-copper reagents has been investigated (equation 49)66. Cyano-substituted complexes undergo intramolecular nucleophilic additions when treated with lithium diisopropylamide (LDA) as shown in equation 50. 

To obtain complete conversion of ketones to enolates, it is necessary to use aprotic solvents so that solvent deprotonation does not compete with enolate formation. Stronger bases, such as amide anion ( NH2), the conjugate base of DMSO (sometimes referred to as the dimsyl anion),2 and triphenylmethyl anion, are capable of effecting essentially complete conversion of a ketone to its enolate. Lithium diisopropylamide (LDA), which is generated by addition of w-butyllithium to diisopropylamine, is widely used as a strong... 

A somewhat different approach to this series of compounds involves the reaction between a carbanion and an aromatic nitrile. Thus, a series of methylpyrazines 253 is first treated with lithium diisopropylamide (LDA) to generate an anion at the methyl group. Addition of an aromatic nitrile produces 254 (Equation 89) <2003JME222, 2004EUP1388541>. Many other examples have been reported <2003JME222>, including some with substituents at the open position in structure 254. 

---