Materials Length Scales

Hierarchical porous materials are sohds that are ordered at different length scales. Materials with multiple porosities are of high interest for apphcations in catalysis and separation, because these apphcations can take advantages of different pore structures. For example, microporous mesoporous composites have shown superior catalytic activities by the combination of strong acidity from zeohtes with high reactant or product mobility due to large uniform mesopores. Several approaches have been reported on the design and synthesis of hierarchical porous materials, as discussed below. 

In order to describe the second-order nonlinear response from the interface of two centrosynnnetric media, the material system may be divided into tlnee regions the interface and the two bulk media. The interface is defined to be the transitional zone where the material properties—such as the electronic structure or molecular orientation of adsorbates—or the electromagnetic fields differ appreciably from the two bulk media. For most systems, this region occurs over a length scale of only a few Angstroms. With respect to the optical radiation, we can thus treat the nonlinearity of the interface as localized to a sheet of polarization. Fonnally, we can describe this sheet by a nonlinear dipole moment per unit area, -P ", which is related to a second-order bulk polarization by hy P - lx, y,r) = y. Flere z is the surface nonnal direction, and the... 

Although much as been done, much work remains. Improved material models for anisotropic materials, brittle materials, and chemically reacting materials challenge the numerical methods to provide greater accuracy and challenge the computer manufacturers to provide more memory and speed. Phenomena with different time and length scales need to be coupled so shock waves, structural motions, electromagnetic, and thermal effects can be analyzed in a consistent manner. Smarter codes must be developed to adapt the mesh and solution techniques to optimize the accuracy without human intervention. 

The engineering of novel deviees requires, in many eases, materials with finely seleeted and preestablished properties. In partieular, one of the most promising lines of synthetic materials research consists in the development of nanostructured systems (nanocomposites). This term describes materials with structures on typical length scale of 1-100 nm. Nanometric pieces of materials are in an intermediate position between the atom and the solid, displaying electronic, chemical and structural properties that are distinct from the bulk. The use of nanoparticles as a material component widens enormously the available attributes that can be realised in practice, which otherwise would be limited to bulk solid properties. 

In modern materials science topics of high interest are surface structures on small (nanometer-length) scales and phase transitions in adsorbed surface layers. Many interesting effects appear at low temperatures, where quantum effects are important, which have to be taken into account in theoretical analyses. In this review a progress report is given on the state of the art of (quantum) simulations of adsorbed molecular layers. 

The ratio (p/G) has the units of time and is known as the elastic time constant, te, of the material. Little information exists in the published literature on the rheomechanical parameters, p, and G for biomaterials. An exception is red blood cells for which the shear modulus of elasticity and viscosity have been measured by using micro-pipette techniques 166,68,70,72]. The shear modulus of elasticity data is usually given in units of N m and is sometimes compared with the interfacial tension of liquids. However, these properties are not the same. Interfacial tension originates from an imbalance of surface forces whereas the shear modulus of elasticity is an interaction force closely related to the slope of the force-distance plot (Fig. 3). Typical reported values of the shear modulus of elasticity and viscosity of red blood cells are 6 x 10 N m and 10 Pa s respectively 1701. Red blood cells typically have a mean length scale of the order of 7 pm, thus G is of the order of 10 N m and the elastic time constant (p/G) is of the order of 10 s. 

---