Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Koutecky-Levich plots

The experiments showed that the properties of the Pt monolayer were modified differently by the different supporting metal (Fig. 9.13). PtML/Pd(lll) and PIml/ Ru(OOOl) are the most and least active of these surfaces, respectively. When the ORR kinetic currents obtained from Koutecky-Levich plots are plotted against the... [Pg.288]

One also needs to be careful when using the slope of the Koutecky-Levich plot to determine av of the catalytic film. Examples of metaUoporphyrin-catalyzed ORR have been reported where, above a certain value of the electrode rotational frequency, the catalytic currents became independent of Koutecky-Levich model, either because the rate of charge or substrate transfer within the film became rate-limiting or the catalyst became partially samrated with O2 [Boulatov et al., 2002 Song et al., 1998 CoUman et al., 1980]. In other cases, the versus graphs may remain mostly linear within the experimental... [Pg.650]

Although, in theory, the Koutecky-Levich equation can be applied to estimate n y and k at any part of the voltammogram (provided that the conditions stated above are satisfied), for practical reasons only limiting (plateau) currents can be acquired with adequate reproducibility to yield suitable Koutecky-Levich plots. [Pg.651]

Figure 14.3 Koutecky-Levich plot for four different overpotentials. Figure 14.3 Koutecky-Levich plot for four different overpotentials.
The current-potential characteristics of a redox reaction can thus be measured in the following way An overpotential rj is applied, and the current is measured for various rotation rates in. From a Koutecky-Levich plot the corresponding kinetic current jk(rj) is extrapolated. This procedure is repeated for a series of overpotentials, and the dependence of jk on rj is determined. [Pg.190]

The tungsten carbonyl, Wx(CO) was synthesized and studied as a catalyst for ORR reactions.198-200 Through these studies, it was found that the tungsten carbonyl was active for ORR. The Koutecky-Levich plots showed that the electrons transferred approached four during ORR.199 It was also found that the tungsten carbonyl was active for the electrolysis of water.199... [Pg.355]

The rate constant, k, may then be derived from variation of the plateau current with the rotation rate by means of the popular Koutecky-Levich plots, where the inverse of the plateau current is plotted against the inverse of the square root of the rotation rate (Figure 4.12). The intercept allows the determination of the kinetic constant kr°, and of the rate constant k, if the amount of catalyst on the electrode surface is known. [Pg.271]

FIGURE 4.12. Koutecky-Levich plot of the variation of the RDEV plateau current with the rotation rate. [Pg.272]

In zone R, all three phenomena that take place in the film are fast compared to the diffusion of the substrate from the bulk of the solution to the film-solution interface. The concentrations of both Q and A are constant through the film. The RDEV response is similar to that of a monolayer coating (Section 4.3.2), except that more catalytic material is present on the surface of the electrode (it is multiplied by the number of layers in the multilayered coating). A linear Koutecky-Levich plot is obtained from the intercept, from which the kinetics of the catalytic reaction can be characterized. [Pg.288]

It is interesting to note that there is no complete symmetry between the role of substrate diffusion and electron transport in their combination with the catalytic reaction, as can be seen in the structures compared in the equations and also in the fact that linear Koutecky-Levich plots are not obtained in all cases, as noted in Table 4.1. [Pg.290]

Fig. 14.23 Koutecky-Levich plots for the ORR of unpyrolyzed and pyrolyzed Ppy-C-Co catalysts at 0.3 V (zs. RHE) in 0.5 M H2S04 under saturated 02 and 0.122 mgcrn-2 Ppy-C-Co loading. The current densities were normalized to the geometric area (Reprinted from [224] with permission from Elsevier). Fig. 14.23 Koutecky-Levich plots for the ORR of unpyrolyzed and pyrolyzed Ppy-C-Co catalysts at 0.3 V (zs. RHE) in 0.5 M H2S04 under saturated 02 and 0.122 mgcrn-2 Ppy-C-Co loading. The current densities were normalized to the geometric area (Reprinted from [224] with permission from Elsevier).
To learn that when the rate of electron transfer is slow, a useful approach is to construct Koutecky-Levich plots of (/(current) against l/Tafel plot from these mass-transport-limiting values of the current. [Pg.196]

Koutecky-Levich Plots and Measurement of the Rates of Electron Transfer... [Pg.232]

In order to resolve this conundrum, we draw a Koutecky-Levich plot of l/(current) (as y ) against lw (as x ). (Plots using these axes are also sometimes called inverse-Levich plots .)... [Pg.233]

What is the benefit of such a Koutecky-Levich plot ... [Pg.233]

The value of = 0 in a Koutecky-Levich plot implies that the rotation speed is infinite. We should appreciate that any current obtained at o) — 00 would automatically represent a mass-transport-limited quantity. So let us now look at what the non-limiting currents along the y-cpcis really mean when x is 0. [Pg.233]

Figure 7.14 Koutecky-Levich plots of l/(current) against as a function of... Figure 7.14 Koutecky-Levich plots of l/(current) against as a function of...
By constructing a Koutecky-Levich plot and obtaining the value of the current from the intercept, we have simplified the problems from two unknowns to one the only limitation to the magnitude of the current on the y-axis (strictly speaking, it is the reciprocal of the value on the y-axis) is the rate of electron transfer. [Pg.234]

Occasionally, the analyst is required to determine the rate of electron transfer, ket, and can then use the Butler-Volmer equation (equation (7.16)) to determine 7o, from which ket is readily calculated by using equation (7.17). The preferred method of obtaining the exchange currents in such cases is under conditions of infinite rotation speed i.e. via a Koutecky-Levich plot. [Pg.236]

Figure 5.72 Typical Koutecky-Levich plots for the reduction of a 0.2 mM [Fe(H20)6]3+ solution in 0.1 M H2S04 at platinum electrodes modified with layers of different surface coverages of [Os(bpy)2(PVP)ioCl]+. From top to bottom, the surface coverages (in mol cm-2) are 1.7 x 10-1°, 1.8 x 10 9, 2.7 x 10-9, 5.0 x 10 9,1.1 x 10 8, and bare platinum. From R. J. Forster and J. G. Vos, /. Chem. Soc., Faraday Trans., 87,1863-1867 (1991). Reproduced by permission of The Royal Society of Chemistry... Figure 5.72 Typical Koutecky-Levich plots for the reduction of a 0.2 mM [Fe(H20)6]3+ solution in 0.1 M H2S04 at platinum electrodes modified with layers of different surface coverages of [Os(bpy)2(PVP)ioCl]+. From top to bottom, the surface coverages (in mol cm-2) are 1.7 x 10-1°, 1.8 x 10 9, 2.7 x 10-9, 5.0 x 10 9,1.1 x 10 8, and bare platinum. From R. J. Forster and J. G. Vos, /. Chem. Soc., Faraday Trans., 87,1863-1867 (1991). Reproduced by permission of The Royal Society of Chemistry...
Oct. 14, 1922, Kromeriz, then Czechoslovakia - Aug. 10, 2005, Berlin, Germany) Koutecky was a theoretical electrochemist, quantum chemist, solid state physicist (surfaces and chemisorption), and expert in the theory of clusters. He received his PhD in theoretical physics, was later a co-worker of -> Brdicka in Prague, and since 1967 professor of physical chemistry at Charles University, Prague. Since 1973 he was professor of physical chemistry at Freie Universitat, Berlin, Germany. Koutecky solved differential equations relevant to spherical -> diffusion, slow electrode reaction, - kinetic currents, -> catalytic currents, to currents controlled by nonlinear chemical reactions, and to combinations of these [i-v]. For a comprehensive review of his work on spherical diffusion and kinetic currents see [vi]. See also Koutecky-Levich plot. [Pg.389]

Koutecky-Levich plot — The diffusion-limited current fiim> diff at a -> rotating disk electrode is given by the -> Levich equation based totally on mass-transfer-limited conditions. The disk current in the absence of diffusion control, i.e., in case of electron transfer control, would be... [Pg.389]

Levich plot -> Koutecky-Levich plot Lewis, Gilbert Newton... [Pg.399]


See other pages where Koutecky-Levich plots is mentioned: [Pg.648]    [Pg.649]    [Pg.651]    [Pg.695]    [Pg.190]    [Pg.345]    [Pg.289]    [Pg.295]    [Pg.451]    [Pg.370]    [Pg.253]    [Pg.253]    [Pg.254]    [Pg.430]    [Pg.431]    [Pg.431]    [Pg.432]    [Pg.433]    [Pg.428]    [Pg.431]    [Pg.2679]    [Pg.360]    [Pg.926]   
See also in sourсe #XX -- [ Pg.188 ]

See also in sourсe #XX -- [ Pg.251 , Pg.255 ]

See also in sourсe #XX -- [ Pg.189 ]

See also in sourсe #XX -- [ Pg.39 ]




SEARCH



Koutecky-Levich

Koutecky-Levich plots potentials

Levich

Levich plots

© 2024 chempedia.info