Kelvin-Voigt

The spring constant, 2, for the Kelvin-Voigt element is obtained from the maximum retarded strain, 2, in Fig. 2.40. 

The dashpot constant, rj2, for the Kelvin-Voigt element may be determined by selecting a time and corresponding strain from the creep curve in a region where the retarded elasticity dominates (i.e. the knee of the curve in Fig. 2.40) and substituting into equation (2.42). If this is done then r)2 = 3.7 X 10 MN.s/m ... 

The viscoelastic behaviour of a certain plastic is to be represented by spring and dashpot elements having constants of 2 GN/m and 90 GNs/m respectively. If a stress of 12 MN/m is applied for 100 seconds and then completely removed, compare the values of strain predicted by the Maxwell and Kelvin-Voigt models after (a) 50 seconds (b) 150 seconds. 

Maxwell and Kelvin-Voigt models are to be set up to simulate the creep behaviour of a plastic. The elastic and viscous constants for the Kelvin-Voigt models are 2 GN/m and 100 GNs/m respectively and the viscous constant for the Maxwell model is 200 GNs/m. Estimate a suitable value for the elastic constant for the Maxwell model if both models are to predict the same creep strain after 50 seconds. 

The creep curve for polypropylene at 4.2 MN/m (Fig. 2.5) is to be represented for times up to 2 X 10 s by a 4-element model consisting of a Maxwell unit and a Kelvin-Voigt unit in series. Determine the constants for each of the elements and use the model to predict the strain in this material after a stress of 5.6 MN/m has been applied for 3 x 10 seconds. 

A plastic which behaves like a Kelvin-Voigt model is subjected to the stress history shown in Fig. 2.87. Use the Boltzmanns Superposition Principle to calculate the strain in the material after (a) 90 seconds (b) 150 seconds. The spring constant is 12 GN/m and the dashpot constant is 360 GNs/m. ... 

Here the time derivative of the strain is represented by Newton s dot. This is the response of a purely viscous fluid. Now suppose we consider a combination of these models. The two simplest arrangements that we can visualise is the models in series or parallel. When they are placed in series we have a Maxwell model and in parallel we have a Kelvin (or sometimes a Kelvin-Voigt) model. 

Figure 4.8 A multiple Maxwell model and a multiple Kelvin- Voigt model...

Evidently a fluid polymer cannot be considered in the model the deformation approaches to a limit. For a solid polymer the model seems more appropriate, though is represents neither a spontaneous elastic deformation nor permanent flow. Therefore a combination of a Kelvin-Voigt element with a spring and with a dashpot in series is, in principle, more appropriate. 

Without the superposition principle we find the same result After taking away the stress the spring Ei is unloaded and we keep the deformed Kelvin-Voigt element with a strain e = a/Eiy - exp(-ii/T)) = e t ). 

The spring Ei now pulls back the Kelvin-Voigt element from t=ti with a stress (7, proportional to the remaining deformation e a = i e( -1 ). 

The Kelvin — Voigt Model. A similar development can be followed for the case of a spring and dashpot in parallel, as shown schematically in Figure 5.61a. In this model, referred to as the Kelvin-Voigt model of viscoelasticity, the stresses are additive... 

Figure 5.61 (a) Kelvin-Voigt spring and dashpot in parallel model of viscoelasticity and... 

The Four-Element ModeF. The behavior of viscoelastic materials is complex and can be better represented by a model consisting of four elements, as shown in Figure 5.62. We will not go through the mathematical development as we did for the Maxwell and Kelvin-Voigt models, but it is worthwhile studying this model from a qualitative standpoint. 

According to the Kelvin (Voigt) model of viscoelasticity, what is the viscosity (in Pa-s) of a material that exhibits a shear stress of 9.32 x 10 Pa at a shear strain of 0.5 cm/cm over a duration of 100 seconds The shear modulus of this material is 5 x 10 Pa. 

Figure H3.3.4 Mechanical models are often used to model the response of foods in creep or stress relaxation experiments. The models are combinations of elastic (spring) and viscous (dashpot) elements. The stiffness of each spring is represent by its compliance (J= strain/stress), and the viscosity of each dashpot is represent by a Newtonian viscosity (ri). The form of the arrangement is often named after the person who originally proposed the model. The model shown is called a Burgers model. Each element in the middle—i.e., a spring and dashpot arranged in parallel—is called a Kelvin-Voigt unit.

There are several models to describe the viscoelastic behavior of different materials. Maxwell model, Kelvin-Voigt model, Standard Linear Solid model and Generalized Maxwell models are the most frequently applied. 

The Kelvin-Voigt model, also known as the Voigt model, consists of a Newtonian damper and Hookean elastic spring connected in parallel, as shown in the picture. It is used to explain the stress relaxation behaviors of polymers. 

Therefore under a constant stress, the modeled material will instantaneously deform to some strain, which is the elastic portion of the strain, and after that it will continue to deform and asynptotically approach a steady-state strain. This last portion is the viscous part of the strain. Although the Standard Linear Solid Model is more accurate than the Maxwell and Kelvin-Voigt models in predicting material responses, mathematically it returns inaccurate results for strain under specific loading conditions and is rather difficult to calculate. 

A parallel array of E and h gives a Kelvin-Voigt element. This model does not allow an instantaneous deformation (the stress on the dashpot would be infinite), and it does not show stress relaxation. At a constant stress it exhibits creep at time t its strain is ( ) the stress in the spring then is ... 

Both models, the Maxwell element and the Kelvin-Voigt element, are limited in their representation of the actual viscoelastic behaviour the former is able to describe stress relaxation, but only irreversible flow the latter can represent creep, but without instantaneous deformation, and it cannot account for stress relaxation. A combination of both elements, the Burgers model, offers more possibilities. It is well suited for a qualitative description of creep. We can think it as composed of a spring Ei, in series with a Kelvin-Voigt element with 2 and 772. and with a dashpot, 771... 

The models described so far provide a qualitative illustration of the viscoelastic behaviour of polymers. In that respect the Maxwell element is the most suited to represent fluid polymers the permanent flow predominates on the longer term, while the short-term response is elastic. The Kelvin-Voigt element, with an added spring and, if necessary, a dashpot, is better suited to describe the nature of a solid polymer. With later analysis of the creep of polymers, we shall, therefore, meet the Kelvin-Voigt model again in more detailed descriptions of the fluid state the Maxwell model is being used. 

In a similar way the creep can be represented by a number of Kelvin-Voigt elements in series ... 

The usual way in which the deformation changes with time, has been dealt with in 6.1. The best representation appeared to be a Maxwell element with a Kelvin-Voigt element in series the deformation is then composed of three components an immediate elastic strain, which recovers spontaneously after removal of the load, a delayed elastic strain which gradually recovers, and a permanent strain. Moreover, we noticed that a single retardation time (a single Kelvin-Voigt element) is not sufficient we need to introduce a spectrum ... 

Summarizing The basic idea, mentioned in chapter 6, that creep of solid polymers could be represented by a simple four-parameter model (the Burgers model), composed of a Maxwell and a Kelvin-Voigt model in series, appears to be inadequate for three reasons ... 

These three complications are schematically shown in Figure 7.11, using creep isochrones as a reference (a) a Kelvin-Voigt element has been chosen with a spring in series (a Burgers model without irreversible flow). 

In the Kelvin-Voigt test, emax is imposed almost instantly and maintained, while a declining t is measured from its corresponding maximum (Fig. 2b Kaelble, 1971) ... 

---