Isotope dilution analysis metal complexes

SSMS can be classified among the milliprobe techniques (Figure 8.3), i.e. it is a unique link between microprobe techniques and macroanalytical methods that are characterised by poor lateral and in-depth resolutions (as in OES), or that have no lateral resolution whatsoever (as in NAA). Also, the achievable precision and accuracy are poor, because of the irreproducible behaviour of the r.f. spark. Whereas analysis of metals, semiconductors and minerals is relatively simple and the procedures have become standardised, the analysis of nonconducting materials is more complex and generally requires addition of a conducting powder (e.g. graphite) to the sample [359]. Detection limits are affected by the dilution, and trace contamination from the added components is possible. These problems can be overcome by the use of lasers [360]. Coupled with isotope dilution, a precision of 5% can be attained for SSMS. 

Mass spectrometry can be specific in certain cases, and would even allow on-line QA in the isotope dilution mode. MS of molecular ions is seldom used in speciation analysis. API-MS allows compound-specific information to be obtained. APCI-MS offers the unique possibility of having an element- and compound-specific detector. A drawback is the limited sensitivity of APCI-MS in the element-specific detection mode. This can be overcome by use of on-line sample enrichment, e.g. SPE-HPLC-MS. The capabilities of ESI-MS for metal speciation have been critically assessed [546], Use of ESI-MS in metal speciation is growing. Houk [547] has emphasised that neither ICP-MS (elemental information) nor ESI-MS (molecular information) alone are adequate for identification of unknown elemental species at trace levels in complex mixtures. Consequently, a plea was made for simultaneous use of these two types of ion source on the same liquid chromatographic effluent. 

---