Isotactic polypropylene—continued properties

In rubber-plastic blends, clay reportedly disrupted the ordered crystallization of isotactic polypropylene (iPP) and had a key role in shaping the distribution of iPP and ethylene propylene rubber (EPR) phases larger filler contents brought about smaller, less coalesced and more homogeneous rubber domains [22]. Clays, by virtue of their selective residence in the continuous phase and not in the rubber domains, exhibited a significant effect on mechanical properties by controlling the size of rubber domains in the heterophasic matrix. This resulted in nanocomposites with increased stiffness, impact strength, and thermal stability. 

The tensile properties of isotactic polypropylene materials reinforced with continuous nylon fibers were measured. Less than 10 vol % of the fibers leads to an increased yield strength and yield elongation. As little as 3 vol % of the nylon fibers increased the elongation at necking from 10 to 20%. This retarded necking arises from the fiber-matrix debonding which delocalizes the microscopic yielding processes. 

As demand for polyethylene has increased, there has been a continuous effort to improve catalyst activity. This was important to achieve high productivity at relatively short residence times. These properties have avoided the need to remove catalyst residues from the product It was also important for polypropylene to have a high isotactic index to ehminate the need for equipment for the extraction of atactic polymer. 

---