Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Iron coordination complexes

There are four naturally occurring isotopes of iron ( Fe 5.82%, Fe 91.66%, Fe 2.19%, Fe 0.33%), and nine others are known. The most abundant isotope ( Fe) is the most stable nuclear configuration of all the elements in terms of nuclear binding energy per nucleon. This stability, in terms of nuclear equilibrium established in the last moments of supernova events, explains the widespread occurrence of iron in the cosmos. The isotope Fe has practical applications, most notably in Mossbauer spectroscopy, which has been widely exploited to characterize iron coordination complexes. [Pg.405]

The data for mixed metal zeolites as first prepared by Scherzer and Fort (18) shown in Tables I and XI are quite extensive. The reported isomer shifts and quadrupole splittings are for the iron atoms in the anionic state. Each of these unreduced samples show Mossbauer spectra that are in close agreement with literature values of the corresponding iron coordination complexes. Typical examples of unreduced and reduced samples are shown in Figures 3 and 4. We note here that preparations 16 through 22 are new and are developments of our laboratory and that 9 through 15 are preparations based on the work of Scherzer and Fort (18). Samples 16 and 17 show that this method can be extended to other zeolites like ZSM-5. If no transition metal cation is used in the synthesis, no Mossbauer spectrum for the corresponding anion is observed. Therefore, the nature of the cation is critical and complexation of the anion to a cation is necessary for anion inclusion. Certain transition metal cations (Ru + for instance) do not seem to bind the anion. [Pg.314]

Recent Advances in the Selective Oxidation of Alkyl C-H Bonds Catalyzed by Iron Coordination Complexes... [Pg.27]

Abstract Selective and stereoretentive oxidation of alkyl C-H bonds has been described over the last decade by employing biologically inspired iron coordination complexes as catalysts and hydrogen peroxide as oxidant. Examples of catalyst dependent C-H site selectivity have started to appear. The current paper describes an account of these findings. [Pg.27]

Keywords Alkyl C-H oxidation Aminopyridine ligands Bioinspired catalysis Hydrogen peroxide Iron coordination complexes Nonheme oxygenases Selectivity... [Pg.27]

Iron Coordination Complexes as Catalysts for Selective C-H Bond Oxidation. 31... [Pg.27]

Lloret-FiUol J, Codola Z, Garcia-Bosch I, Gomez L, PlaJJ, Costas M. Efficient water oxidation catalysis based on readily available iron coordination complexes. Nat Chem. 2011 3 807-813. [Pg.174]

Iron hahdes react with haHde salts to afford anionic haHde complexes. Because kon(III) is a hard acid, the complexes that it forms are most stable with F and decrease ki both coordination number and stabiHty with heavier haHdes. No stable F complexes are known. [FeF (H20)] is the predominant kon fluoride species ki aqueous solution. The [FeF ] ion can be prepared ki fused salts. Whereas six-coordinate [FeCy is known, four-coordinate complexes are favored for chloride. Salts of tetrahedral [FeCfy] can be isolated if large cations such as tetraphenfyarsonium or tetra alkylammonium are used. [FeBrJ is known but is thermally unstable and disproportionates to kon(II) and bromine. Complex anions of kon(II) hahdes are less common. [FeCfy] has been obtained from FeCfy by reaction with alkaH metal chlorides ki the melt or with tetraethyl ammonium chloride ki deoxygenated ethanol. [Pg.436]

In analogy to the situation for bipyridine, the blue tris(l,10-phenanthroline)iron(3+) ion [1347949-7], [Fe(phen)2], must be obtained by oxidation of the corresponding iron(II) ion. [Fe(phen)2] has an absorption maximum at 590 nm, an absorptivity of 600 (Mem), and a formation constant of 10 . In solutions of pH > 4, this species is reduced to the iron(II) complex. The reduction is instantaneous in alkaline solution. At pH < 2, protons compete with iron(III) for the phenanthroline nitrogens and coordination is incomplete. [Fe(phen)2] is used most often in solution as an oxidant, but the trichloride [40273-22-1] and the triperchlorate monohydrate [20774-81-6] salts have been prepared. [Pg.440]

In the complexes of 1,3-boroles containing the unsaturated substituents (89CB633, 90CB2273, 94CB2393), the coordination mode is in the case of iron tricarbonyl complexes 10 and 11 (R = H, Me). [Pg.7]

Other paramagnetic bis(amidinate) iron(II) complexes of the type [But(NR)2]2Fe (R = Cy, Pr ) have been prepared analogously from the lithium amidinate salts and FeCl2- The coordination geometry around Fe is distorted tetrahedral (Scheme 137). [Pg.277]

Iron(II) alkyl anions fFe(Por)R (R = Me, t-Bu) do not insert CO directly, but do upon one-electron oxidation to Fe(Por)R to give the acyl species Fe(Por)C(0)R, which can in turn be reduced to the iron(II) acyl Fe(Por)C(0)R]. This process competes with homolysis of Fe(Por)R, and the resulting iron(II) porphyrin is stabilized by formation of the carbonyl complex Fe(Por)(CO). Benzyl and phenyl iron(III) complexes do not insert CO, with the former undergoing decomposition and the latter forming a six-coordinate adduct, [Fe(Por)(Ph)(CO) upon reduction to iron(ll). The failure of Fe(Por)Ph to insert CO was attributed to the stronger Fe—C bond in the aryl complexes. The electrochemistry of the iron(lll) acyl complexes Fe(Por)C(0)R was investigated as part of this study, and showed two reversible reductions (to Fe(ll) and Fe(l) acyl complexes, formally) and one irreversible oxidation process."" ... [Pg.258]

Structural types for organometallic rhodium and iridium porphyrins mostly comprise five- or six-coordinate complexes (Por)M(R) or (Por)M(R)(L), where R is a (T-bonded alkyl, aryl, or other organic fragment, and Lisa neutral donor. Most examples contain rhodium, and the chemistry of the corresponding iridium porphyrins is much more scarce. The classical methods of preparation of these complexes involves either reaction of Rh(III) halides Rh(Por)X with organolithium or Grignard reagents, or reaction of Rh(I) anions [Rh(Por)] with alkyl or aryl halides. In this sense the chemistry parallels that of iron and cobalt porphyrins. [Pg.293]

Iron hydride complexes can be synthesized by many routes. Some typical methods are listed in Scheme 2. Protonation of an anionic iron complex or substitution of hydride for one electron donor ligands, such as halides, affords hydride complexes. NaBH4 and L1A1H4 are generally used as the hydride source for the latter transformation. Oxidative addition of H2 and E-H to a low valent and unsaturated iron complex gives a hydride complex. Furthermore, p-hydride abstraction from an alkyl iron complex affords a hydride complex with olefin coordination. The last two reactions are frequently involved in catalytic cycles. [Pg.29]

The proposed mechanism for Fe-catalyzed 1,4-hydroboration is shown in Scheme 28. The FeCl2 is initially reduced by magnesium and then the 1,3-diene coordinates to the iron center (I II). The oxidative addition of the B-D bond of pinacolborane-tfi to II yields the iron hydride complex III. This species III undergoes a migratory insertion of the coordinated 1,3-diene into either the Fe-B bond to produce 7i-allyl hydride complex IV or the Fe-D bond to produce 7i-allyl boryl complex V. The ti-c rearrangement takes place (IV VI, V VII). Subsequently, reductive elimination to give the C-D bond from VI or to give the C-B bond from VII yields the deuterated hydroboration product and reinstalls an intermediate II to complete the catalytic cycle. However, up to date it has not been possible to confirm which pathway is correct. [Pg.51]

The proposed catalytic cycle is shown in Scheme 31. Hence, FeCl2 is reduced by magnesium and subsequently coordinates both to the 1,3-diene and a-olefin (I III). The oxidative coupling of the coordinated 1,3-diene and a-olefin yields the allyl alkyl iron(II) complex IV. Subsequently, the 7i-a rearrangement takes place (IV V). The syn-p-hydride elimination (Hz) gives the hydride complex VI from which the C-Hz bond in the 1,4-addition product is formed via reductive elimination with regeneration of the active species II to complete the catalytic cycle. Deuteration experiments support this mechanistic scenario (Scheme 32). [Pg.53]


See other pages where Iron coordination complexes is mentioned: [Pg.191]    [Pg.1184]    [Pg.1958]    [Pg.292]    [Pg.135]    [Pg.1957]    [Pg.1184]    [Pg.4638]    [Pg.29]    [Pg.30]    [Pg.191]    [Pg.1184]    [Pg.1958]    [Pg.292]    [Pg.135]    [Pg.1957]    [Pg.1184]    [Pg.4638]    [Pg.29]    [Pg.30]    [Pg.395]    [Pg.252]    [Pg.120]    [Pg.433]    [Pg.439]    [Pg.439]    [Pg.441]    [Pg.441]    [Pg.442]    [Pg.2]    [Pg.309]    [Pg.127]    [Pg.44]    [Pg.149]    [Pg.277]    [Pg.316]    [Pg.40]    [Pg.260]    [Pg.313]    [Pg.58]    [Pg.30]   
See also in sourсe #XX -- [ Pg.27 , Pg.31 ]




SEARCH



Iron coordination

© 2024 chempedia.info