Interfering group

Note if llic following groups arc present on either the Griguard reagent or the carbonyl containing compound, procedure VI-4 often produces an unsatisfactory yield of of tiie desired alcohol and other procedures must be used. The interfering groups are -OH, —NHlt —CO,H, — CO, R, -ON, -NO,. 

Clearly, this particular selection of surfactants divides, in their interfacial tension behavior against crude oils, along the lines which were predicted by considering their alkane preferences. This provides support for the idea that estimation of alkane preference by consideration of hydrophobic/interfering group balance (16) can be used as a screening test for deciding whether a surfactant has potential for use in oil recovery. Obviously, the evidence is still limited. In particular, the surfactants compared in the present study have very similar structures and we cannot be... 

Cross-Linked Polymers. Apart from the soluble polymers, insoluble resins with unusual functional groups are of interest in areas such as metal-chelating resins. The most promising monomers of Table I were studied as potential resins. To obtain cross-linked polymers without adding new interfering groups, 1,6-diallylaminohexane (XVI) was used in 5-10 mol % quantities as the cross-linking monomer. 

In any case, an absolute prerequisite for specific binding is the structural complementarity of ligand and receptor at the recognition site. Any lack of complementarity, caused by unfavorable van der Waals contacts between sterically interfering groups, will interfere with specific binding to the active site. Structural and conformational aspects of the mutual binding process are discussed in more detail in Section 13.2. 

To identify the compound as a member of a set that is not desired. These classes might include common interfering groups of compounds such as tannins and polyphenols, fatty acids, or proteins, that may show nonspecific biological activity. The natural product might be one or a mixture of such compounds and may even include novel compoimds. 

CONDIT compares the set of conditions for the reaction (or reaction step) with the set of sensitivities of each group to those conditions, leading to a set of Interfering groups (IGRPS) (acid Interferes) ... 

An asterisk on the spectral position number indicates that a second group frequency is interfering with the group frequency assignment. If the interfering group is known, it is listed below the vibration. 

---