Insulation materials, thermal extruded polystyrene

Polystyrene can be moulded, cast or extruded in sheets, rods and tubes. It can be easily pigmented. It finds wide, application in making household goods, lenses, plastic moulds, toys, wood laminates, films, battery boxes and electrical components. Expanded polystyrene is used as thermal insulating material and packaging. It is also used in lifejackets and floats. 

In modem PMR construction, thermal insulation that is unaffected by water or that can be kept dry in some manner is required. Extruded polystyrene (XEPS) foam insulation boards are commonly employed (see Insulation, THERMAL). They are placed on top of the waterproofing roof membrane, which is next to the deck. The insulation should not be adhered to the membrane. Ballast at the rate of >48.8 kg/m2 (1000 lb/100 ft2) holds the insulation in place and offers protection from the sun. The insulation joints are open and drainage must be provided. Various other materials, eg, patio blocks and concrete slabs, are also used as surfacings and ballast. The extra weight imposes more exacting requirements on construction. 

Expanded polystyrene foam (EPS) has different applications, because of its physical form (beads) and properties (higher permeability to water and less effective adhesion to facing materials than polyurethane). The expansion gases, pentane and steam, escape fairly rapidly from the foam, so the thermal conductivity of the foam filled with air is about twice that of the best polyurethane foam—a 50 mm thick slab of foam has a U-value of 0.5-0.6 Wm K . EPS mouldings can be used as shutters (formwork) for pouring concrete in a composite wall. The two EPS layers are connected at intervals to fix the thickness of the concrete. Extruded polystyrene foam (XPS) is used in plank form for insulation imder the concrete floor of houses, and in roofing panels. 

Polystyrene is an aromatic polymer made from styrene, an aromatic monomer which is commercially manufactured from petroleum. Polystyrene is commonly injection moulded or extruded while expanded polystyrene is either extruded or moulded in a special process. Solid polystyrene is used in disposable cutlery, plastic models, CD and DVD cases, etc. Foamed polystyrene is mainly used for packing materials, insulation, foam drink cups, etc. Polystyrene foams are good thermal insulators and therefore used as building insulation materials such as in structural insulated panel building systems. They are also used for non-weight-bearing architectural structures. The information on OPF-polystyrene composites is limited. 

The PBDEs (decaBDE, octaBDE, and pentaBDE) and are used as flame retardants in plastics, electronic equipment, printed circuit boards, vehicles, furniture, textiles, carpets, and building materials. Global demand has increased rapidly since the 1970s with 70,000 tonnes produced in 2001. Their flame retardant activity relies on decomposition at high temperatures, leading to the release of bromine atoms. This slows the chemical reactions that drive 02-dependent fires. HBCDs are a flame retardant added to extruded and expanded polystyrene that is used as thermal insulation in buildings. 

---