Inserts designs

Convection and Impingement Cooling/Strut Insert Design... 

The above information relates to a package insert designed for the patient, but in some cases further information is required for use by the doctor, dentist or nurse in supplying or administering the product. To cover this need a professional user leaflet may be included provided it is within the scope of the SmPC, but even if the product is administered by a professional a patient insert must also be provided. 

When a combination of these geometric configurations is incorporated into a tool insert design, the usual result is an ideally developed 3D chip-form with chip breaking as shown in Fig. 8. 

Bassan, H.S., Patel, R.V., Moallem, M. A novel manipulator for percutaneous needle insertion Design and experimentation. lEEE/ASME Transactions on Mechatronics 14(6), 746-761 (2009)... 

Figure 11-80. These examples of ultrasonic inserts, designed for excellent performance, result in fast action with very little induced stress.

There are two basic insert designs, straight and tapered, as shown in Fig. 5-7. 

Better known perhaps for its Spread-R shells and shell inserts designed to disperse shot patterns quickly, Polywad s GreenLite shell line use a wad-less technology with a light load (about 3/8 ounce) of steel shot. Components from the steel shot itself to the brown paper wad - except for the shell case (or hull ) which can, though, often be reloaded - are bio- and photo-degradable. 

As stated, the main areas of interest were the upper and lower plenums, the downcomer and the inlet nozzles. In these specified regions of interest, the hardware would be manufactured from acrylic Figure 13-13 shows the test apparatus hardware. There were four separate inlet nozzles that could be used to vary the angle of entry into the inlet plenum. Aluminum inserts designed to... 

---