Inlets, atomic spectroscopy

To examine a sample by inductively coupled plasma mass spectrometry (ICP/MS) or inductively coupled plasma atomic-emission spectroscopy (ICP/AES) the sample must be transported into the flame of a plasma torch. Once in the flame, sample molecules are literally ripped apart to form ions of their constituent elements. These fragmentation and ionization processes are described in Chapters 6 and 14. To introduce samples into the center of the (plasma) flame, they must be transported there as gases, as finely dispersed droplets of a solution, or as fine particulate matter. The various methods of sample introduction are described here in three parts — A, B, and C Chapters 15, 16, and 17 — to cover gases, solutions (liquids), and solids. Some types of sample inlets are multipurpose and can be used with gases and liquids or with liquids and solids, but others have been designed specifically for only one kind of analysis. However, the principles governing the operation of inlet systems fall into a small number of categories. This chapter discusses specifically substances that are normally liquids at ambient temperatures. This sort of inlet is the commonest in analytical work. 

Auger electron spectroscopy Phosphorous/nitrogen-selective alkali/flame ionisation detector Atomic force microscopy Atomic fluorescence spectrometry All-glass heated inlet system... 

Mass balance measurements for 41 elements have been made around the Thomas A. Allen Steam Plant in Memphis, Tenn. For one of the three independent cyclone boilers at the plant, the concentration and flow rates of each element were determined for coal, slag tank effluent, fly ash in the precipitator inlet and outlet (collected isokinetically), and fly ash in the stack gases (collected isokinetically). Measurements by neutron activation analysis, spark source mass spectroscopy (with isotope dilution for some elements), and atomic adsorption spectroscopy yielded an approximate balance (closure to within 30% or less) for many elements. Exceptions were those elements such as mercury, which form volatile compounds. For most elements in the fly ash, the newly installed electrostatic precipitator was extremely efficient. 

---