Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Influence of microstructure

O Neill, P., and A. Ignatiev, 1978. Influence of microstructure on the optical properties of particulate materials gold black, Phys. Rev., B18, 6540-6548. [Pg.513]

The aforementioned numerical experiments, namely quasi-static drainage and steady-state flow simulations, are specifically designed to study the influence of microstructure and wetting characteristics on the underlying two-phase behavior and flooding dynamics in the PEFC CL and GDL. [Pg.277]

Becher PF, Lin HAT, Hwang SL, Hoffmann MJ, Chen IW (1993) The influence of microstructure on the mechanical behavior of silicon nitride ceramics. In Chen IW, Becher P, Mitomo M, Petzow G, Yen TS (eds) Silicon Nitride Ceramics-Scientific and Technological Advances. MRS Symposium Proc 287, MRS Pittsburgh, p 147... [Pg.158]

T Vispersions of acrylic polymer beads in rapidly polymerizable liquids are important biomaterials (I, 2). The biocompatibility and functionality of dental restoratives, dental prostheses, and surgical prostheses depend on the mechanical properties of these biopolymers as well as on their physical and chemical constitution. This investigation was part of a continuing program to determine the influence of microstructural parameters on the mechanical properties of these multiphase systems. The effects of the volume fractions of dispersed phase and matrix, molecular weight of the matrix, chain length and concentration of crosslinkers, impact modifiers, and filler were studied in terms of microstructure, hard-... [Pg.295]

Goepferich, A. Langer, R. The influence of microstructure and monomer properties on the erosion mechanism of a class of polyanhydrides. J. Polym. Sci. A Polym. Chem. 1993, 31, 2445-2458. [Pg.2256]

The Influence of Microstructure on the Properties of Polyacetylene/Polybutadiene Blends... [Pg.487]

An alloy Ni-34.8at.% Al with addition of 0.5at.% of TiBj was investigated after homogenisation in the temperature range of the P phase and after hot deformation by 25 and 50%. The influence of microstructure on the martensitic transformation and fracture toughness was studied. The change of characteristic temperatures and temperature range of martensitic transformation as well as the increase of fracture toughness caused by the presence of the y phase were noticed. [Pg.397]

E. Maahn, B. Seirensen, The influence of microstructure on the corrosion properties of hot-dip galvanized reinforcement in concrete , Corrosion, 1986, 42, 187-196. [Pg.269]

Beauvy, M., D. Stai u, P. Provot, and D. Gosset. 1999. Thermal conductivity of heterogeneous boride careers for nuclear uses Influence of microstructure and estimation. In Abstracts of the 13th International Symposium on Boron, Borides and Related Compounds, Dinard, France, p. 45. [Pg.71]

Pandey B, Ghosh S, Srivastava P, Kumar P, Kanjilal D, Influence of microstructure on room temperature ferromagnetism in Ni implanted nanodimensional ZnO films, J. Appl. Phys., 105,033909-5, 2009. [Pg.146]

Moving to a larger scale, let us now look at the influence of microstructure on elastic behavior. As indicated in the previous section, the elastic constants are a fundamental property of single crystals through the geometry and stiffness of the atomic bonds. Thus, one may expect elastic behavior to be controlled simply by the choice of material. By using composite materials, however, one can control the final set of elastic properties with some precision, i.e., by mixing phases with different elastic constants. Clearly, it is useful to be able to predict the elastic constants of a composite from those of its constituents. This has been accomplished for many types of composite microstructures. For this section, however, the emphasis will be on (elastically) isotropic composites, i.e., composites contain-... [Pg.78]

Gud] Gudladt, H.-J., Wunderlich, W., Costalas, E., The Influence of Microstructure on the Mechanical Properties of a Spinodally Decomposed Cu-Ni-Fe Alloy , Z Metallkd., 88(8), 642-647 (1997) (Experimental, Phase Relations, Morphology, Kinetics, 24)... [Pg.517]

Can] Candela, N., Velasco, F., Martinez, M.A., Torralba, J.M., Influence of Microstructure on Mechanical Properties of Molybdenium Alloyed P/M Steels , J. Mat. Proc. Tech., 168(3), 505-510 (2005) (Meehan. Prop., Experimental, 16)... [Pg.240]

Influence of Microstructure Flaw Populations on Fracture Statistics... [Pg.555]

The theories with internal variables provide detailed description of microstructure by introducing additional variables relevant to the microstructure of the system, and enlarge the domain of application of thermodynamics. Introduction of internal variables may lead a possibility to include the influence of microstructural effects into the description of a macroscopic phenomenon without changing of space and time scales. There are two types of internal variables internal degrees of freedom and internal variables of state. Internal variables of state must have no inertia and they produce no external work. Internal degrees of freedom, on the other hand, have both inertia and flux. [Pg.657]

M. Toupin, T. Brousse and D. Belanger, The influence of microstructure on the charge storage properties of chemically synthesized manganese dioxide, Chem. Mater., 14, 3946-3952 (2002). [Pg.592]

Ochai, I., and Ohba, H. (1989). Influence of microstructure of coating on corrosion resistance of Zn-al alloy coated steel wire manufactured by the double-dip process. Tetsu-To-Hagane (J. Iron Steel Inst. Japan), 75(2), 290-297 (in Japanese). [Pg.489]

See other pages where Influence of microstructure is mentioned: [Pg.367]    [Pg.1241]    [Pg.90]    [Pg.200]    [Pg.231]    [Pg.176]    [Pg.558]    [Pg.158]    [Pg.168]    [Pg.361]    [Pg.129]    [Pg.621]    [Pg.489]    [Pg.491]    [Pg.493]    [Pg.495]    [Pg.70]    [Pg.464]    [Pg.396]    [Pg.445]    [Pg.148]    [Pg.798]    [Pg.274]    [Pg.86]    [Pg.82]    [Pg.184]    [Pg.376]    [Pg.261]    [Pg.2450]    [Pg.373]   


SEARCH



© 2024 chempedia.info