Immobilization polycondensation reactions

Later, polythioesters were prepared by the polycondensation of dicarboxylic acid diesters with a dithiol [43] (Fig. 12). Initially, various lipases were screened in the polycondensation between diethyl adipate and hexane-1,6-dithiol at 120 °C in the presence of molecular sieves. The use of 70wt% immobilized CALB as catalyst proved to be efficient in these polycondensation reactions with dicarboxylic acid... 

Important progress has been made on the use of immobilized enzyme catalyzed polycondensation reactions to prepare a wide range of polyesters (2,83). In this book, Hunsen et al (20) describe how an inunobilized catalyst from Humilica insolens has excellent activity for polycondensation reactions between diols and diacids. The natural role of cutinases is hydrolysis of the outer cutin polyester layer on plant leaves. Cutin is made of long chain... 

Initial investigations of immobilized HiC thermal stability were conducted by performing polycondensation reactions at different temperatures (see Figure 1). 

Rhodium(I) complexes immobilized on silica using 3-(3-silylpropyl)-2,4-pentanedio-nato ligands (38) show good activity in the hydrosilylation of 1-octene with HSi(OEt)3 at 100°C60. The immobilized Rh catalysts are prepared by (i) reaction of (EtO)3Si(CH2)3C(COMe)2Rh(CO)2 with untreated silica (Catalyst A), (ii) reaction of Rh(acac)(CO)2 (acac = acetylacetonato = 2,4-pentanedionato) with silica modified by [(EtO)3Si(CH2)3C(COMe)2] prior to the complexation (Catalyst B), (iii) reaction of [Rh(CO)2Cl]2 with a polycondensate of [(EtO)3Si(CH2)3C(COMe)2] , Si(OEt)4 and water (Catalyst C) and (iv) sol-gel processing of (EtO)3Si(CH2)3C(COMe)2Rh(CO)2 and Si(OEt)4 (Catalyst D). The Catalysts A and B show ca three times better activity than their homogeneous counterparts, while the Catalyst D exhibits only low activity and the Catalyst C is inactive60. 

A series of close-to-spherical styrene/DVB resins of varying particle size and pore diameter were employed as supports for non-covalent adsorptive attachment of CALB by hydrophobic interaction. The effect of matrix particle and pore size on CALB i) adsorption isotherms, ii) fraction of active sites, iii) distribution within supports, and iv) catalytic activity for s-CL ring-opening polymerizations and adipic acid/l,8-octanediol polycondensations is reported. Important differences in the above for CALB immobilized on methyl methacrylate and styrene/DVB resins were found. The lessons learned herein provide a basis to others that seek to design optimal immobilized enzyme catalysts for low molar mass and polymerization reactions. 

---