Hydrolysis, acetal enol ether

Hydrolysis of Acetals, Enol Ethers, and Similar Compounds ... 

Hydrolysis of enol ethers, acetals, or ortho esters... 

Hydrolysis of alkyl halides 0-4 Hydrolysis of inorganic esters 0-6 Hydrolysis of enol ethers, acetals, or ortho esters... 

The oxidation of the cyclic enol ether 93 in MeOH affords the methyl ester 95 by hydrolysis of the ketene acetal 94 formed initially by regioselective attack of the methoxy group at the anomeric carbon, rather than the a-alkoxy ketone[35]. Similarly, the double bond of the furan part in khellin (96) is converted ino the ester 98 via the ketene acetal 97[l23],... 

The crude ketal from the Birch reduction is dissolved in a mixture of 700 ml ethyl acetate, 1260 ml absolute ethanol and 31.5 ml water. To this solution is added 198 ml of 0.01 Mp-toluenesulfonic acid in absolute ethanol. (Methanol cannot be substituted for the ethanol nor can denatured ethanol containing methanol be used. In the presence of methanol, the diethyl ketal forms the mixed methyl ethyl ketal at C-17 and this mixed ketal hydrolyzes at a much slower rate than does the diethyl ketal.) The mixture is stirred at room temperature under nitrogen for 10 min and 56 ml of 10% potassium bicarbonate solution is added to neutralize the toluenesulfonic acid. The organic solvents are removed in a rotary vacuum evaporator and water is added as the organic solvents distill. When all of the organic solvents have been distilled, the granular precipitate of 1,4-dihydroestrone 3- methyl ether is collected on a filter and washed well with cold water. The solid is sucked dry and is dissolved in 800 ml of methyl ethyl ketone. To this solution is added 1600 ml of 1 1 methanol-water mixture and the resulting mixture is cooled in an ice bath for 1 hr. The solid is collected, rinsed with cold methanol-water (1 1), air-dried, and finally dried in a vacuum oven at 60° yield, 71.5 g (81 % based on estrone methyl ether actually carried into the Birch reduction as the ketal) mp 139-141°, reported mp 141-141.5°. The material has an enol ether assay of 99%, a residual aromatics content of 0.6% and a 19-norandrost-5(10)-ene-3,17-dione content of 0.5% (from hydrolysis of the 3-enol ether). It contains less than 0.1 % of 17-ol and only a trace of ketal formed by addition of ethanol to the 3-enol ether. 

In further modifications of these norprogestins, reaction of norethindrone with acetic anhydride in the presence of p-toluene-sulfonic acid, followed by hydrolysis of the first-formed enol acetate, affords norethindrone acetate (41). This in turn affords, on reaction with excess cyclopentanol in the presence of phosphorus pentoxide, the 3-cyclopentyl enol ether (42) the progestational component of Riglovic . Reduction of norethindrone affords the 3,17-diol. The 33-hydroxy compound is the desired product since reactions at 3 do not show nearly the stereoselectivity of those at 17 by virtue of the relative lack of stereo-directing proximate substituents, the formation of the desired isomer is engendered by use of a bulky reducing agent, lithium aluminum-tri-t-butoxide. Acetylation of the 33,173-diol iffords ethynodiol diacetate, one of the most potent oral proves tins (44). ... 

Enol ethers are readily hydrolyzed by acids the rate-determining step is protonation of the substrate. However, protonation does not take place at the oxygen but at the p carbon, because that gives rise to the stable carbocation 104. After that, the mechanism is similar to the A1 mechanism given above for the hydrolysis of acetals. 

The use of oxygen-containing dienophiles such as enol ethers, silyl enol ethers, or ketene acetals has received considerable attention. Yoshikoshi and coworkers have developed the simple addition of silyl enol ethers to nitroalkenes. Many Lewis acids are effective in promoting the reaction, and the products are converted into 1,4-dicarbonyl compounds after hydrolysis of the adducts (see Section 4.1.3 Michael addition).156 The trimethylsilyl enol ether of cyclohexanone reacts with nitrostyrenes in the presence of titanium dichloride diisopropoxide [Ti(Oi-Pr)2Cl2], as shown in Eq. 8.99.157 Endo approach (with respect to the carbocyclic ring) is favored in the presence of Ti(Oi-Pr)2Cl2. Titanium tetrachloride affords the nitronates nonselectively. 

Birch reduction of the norgetrel intermediate 5 oil owed by hydrolysis of the enol ether gives the enone oxidation of the alcohol at 17 leads to dione 7. Fermentation of that intermediate in the presence of the mold PeniciIlium raistricky serves to introduce a hydroxyl group at the 15 position W. Acetal formation with neopentyl glycol affords the protected ketone which consists of a mixture of the A and A isomers (2 ) hindrance at position 17 ensures selective reaction of the 3 ketone. The... 

It is not customary to attempt the isolation of ketone or aldehyde intermediates (121) the formula serves merely as a reminder that once hydrolysis of the protecting enol ether or acetal occurs, the same type of structure is formed from any given dicarbonyl compound. Cyclization has been carried out in refluxing ethanolic picric acid or acetic anhydride with a few drops of sulfuric acid, but Hansen and Amstutz (63JOC393) offered excellent theoretical reasons for avoiding an excess of acid, and reported that best results (Table 3) can be obtained by refluxing the dry hydrobromide in acetic anhydride containing no sulfuric acid. 

The formation and the hydrolysis of acyclic and cyclic acetals have been studied in rather great detail [91]. Several reviews on this topic are available [92] and some comments have been made [13] concerning the carbohydrate series. We have shown in Schemes 1,2, and 3 that a common feature of this reaction seems to be the intermediacy of an oxocarbenium ion. However, the cyclization of such an intermediate has been questioned more recently [93] in the light of the Baldwin s rules for ring closure [94]. At least for the five-membered ring, an SN2-type displacement mechanism far the protonated form (B) of die hemiacetal (A) (favorable 5-exo-tet cyclization) has been proposed rather than the unfavorable 5-endo-trig cyclization of the oxocarbenium ion (C) (Scheme 5). Except when the formation of the enol ether (D) is structurally impossible, the intermediacy of such a compound remains feasible. 

The conversion of an a, -unsaturated aldehyde or ketone into an allylic acetal or ketal, followed by SN2 -type attack of a nucleophile, leads, after hydrolysis of an initially formed enol ether, to a fi-sub-stituted carbonyl compound. The overall sequence (Scheme 23) is equivalent to a direct conjugate addition, but has the advantage that it allows the temporary introduction of a chiral auxiliary group if a chiral (C2-symmetric) diol is used in the acetalization step, die subsequent nucleophilic addition leads to a mix-... 

The enol ether is cleaved under acidic conditions in the first step to give ketone 32. In order to suppress isomerization of the ketone to an u,P-unsaturated system, hydrolysis is conducted in the presence of 2-mercaptoethanol, which leads to formation of the S,0 acetal 31. 

---