Hydrogenation thermodynamics

THE.2. I. Prigogine, Thermodynamique et liaison d hydrogene (Thermodynamics and the hydrogen bond), Bull. Soc. Chim. Belg. 50, I53-I7I (1941). 

In addition to the hydrides of formula HjX, oxygen forms the hydride H2O2, hydrogen peroxide, and sulphur forms a whole series of hydrides called sulphanes. These are yellow liquids which are thermodynamically unstable with respect to hydrogen sulphide and sulphur. 

HYBOT-Plus (hydrogen bonding thermodynamics, calculation of local and molecular physicochemical descriptors) http //www.timtec.net/soJiware/hybot-plus.htm... 

If one would ask a chemist not burdened with any knowledge about the peculiar thermodynamics that characterise hydrophobic hydration, what would happen upon transfer of a nonpolar molecule from the gas phase to water, he or she would probably predict that this process is entropy driven and enthalpically highly unfavourable. This opinion, he or she wo ild support with the suggestion that in order to create room for the nonpolar solute in the aqueous solution, hydrogen bonds between water molecules would have to be sacrificed. 

Chloro 1 3 butadiene (chloroprene) is the monomer from which the elastomer neoprene IS prepared 2 Chloro 1 3 butadiene is the thermodynamically controlled product formed by addi tion of hydrogen chloride to vinylacetylene (H2C=CHC=CH) The principal product under conditions of kinetic control is the allenic chlonde 4 chloro 1 2 butadiene Suggest a mechanism to account for the formation of each product... 

The amide formation reaction (highlighted by the circle) leads to the production of a hydrogen-bonded dimer (ZZ) of the reaction product Z with the template Z. The dimer is in thermodynamic equilibrium with free template in the reaction medium. 

Thermochemistry. Thermodynamic considerations ate of utmost importance in fluorinations. Table 1 is based on JANAF data (25) for CH, which indicate an average carbon-hydrogen bond strength of 410.0 kj/mol (98 kcal/mol) based on the atomization energy of CH. ... 

These membranes mimic natural photosynthesis except that the electrons are directed to form hydrogen. Several sensitizers and catalysts are needed to complete the cycle, but progress is being made. Various siagle-stage schemes, ia which hydrogen and oxygen are produced separately, have been studied, and the thermodynamic feasibiHty of the chemistry has been experimentally demonstrated. 

Some processes use only one reactor (57) or a combination of liquid- and vapor-phase reactors (58). The goal of these schemes is to reduce energy consumption and capital cost. Hydrogenation normally is carried out at 2—3 MPa (20—30 atm). Temperature is maintained at 300—350°C to meet a typical specification of less than 500 ppm benzene in the product at higher temperatures, thermodynamic equiUbrium shifts to favor benzene and the benzene specification is impossible to attain. Also, at higher temperatures, isomerization of cyclohexane to methylcyclopentane occurs typically there is a 200 ppm specification limit on methylcyclopentane content. 

Tables 2,3, and 4 outline many of the physical and thermodynamic properties ofpara- and normal hydrogen in the sohd, hquid, and gaseous states, respectively. Extensive tabulations of all the thermodynamic and transport properties hsted in these tables from the triple point to 3000 K and at 0.01—100 MPa (1—14,500 psi) are available (5,39). Additional properties, including accommodation coefficients, thermal diffusivity, virial coefficients, index of refraction, Joule-Thorns on coefficients, Prandti numbers, vapor pressures, infrared absorption, and heat transfer and thermal transpiration parameters are also available (5,40). Thermodynamic properties for hydrogen at 300—20,000 K and 10 Pa to 10.4 MPa (lO " -103 atm) (41) and transport properties at 1,000—30,000 K and 0.1—3.0 MPa (1—30 atm) (42) have been compiled. Enthalpy—entropy tabulations for hydrogen over the range 3—100,000 K and 0.001—101.3 MPa (0.01—1000 atm) have been made (43). Many physical properties for the other isotopes of hydrogen (deuterium and tritium) have also been compiled (44).

Table 2. Physical and Thermodynamic Properties of Solid Hydrogen...

Thermodynamically, the formation of methane is favored at low temperatures. The equilibrium constant is 10 at 300 K and is 10 ° at 1000 K (113). High temperatures and catalysts ate needed to achieve appreciable rates of carbon gasification, however. This reaction was studied in the range 820—1020 K, and it was found that nickel catalysts speed the reaction by three to four orders of magnitude (114). The Hterature for the carbon-hydrogen reaction has been surveyed (115). 

---