Leak, hydrogen sulfide

Isothiazoline is a widely used biocide, but it is not effective against anaerobic bacteria. It is deactivated by hydrogen sulfide leaks. Also, do not dose to closed systems (because of the presence of 0.2% copper and 2 to 3% magnesium salts, which are used as product stabilizers and can increase the risk of galvanic corrosion). Additionally, the high pH of closed-loop systems will hydrolyze isothiazoline. Automated feed systems may be useful for dosing isothiazolines due to the severe skin irritant nature of this material. 

Both iron and aluminum are particulady troublesome because of their abiUty to act as coagulants. Also, their soluble and insoluble hydroxide forms can each cause precipitation of some water treatment chemicals, such as orthophosphate. Airborne contaminants usually consist of clay and dirt particles but can include gases such as hydrogen sulfide, which forms insoluble precipitates with many metal ions. Process leaks introduce a variety of contaminants that accelerate deposition and corrosion. 

Cracking was caused by stress-corrosion cracking (see Chap. 9, Stress-Corrosion Cracking ) involving hydrogen sulfide and/or moist sulfur dioxide. The sulfur entered the cooling water stream through process leaks, which were repaired. 

Since desalting is a closed process, there is little potential for exposure to the feedstock unless a leak or release occurs. However, whenever elevated temperatures are used when desalting sour (sulfur-containing) petroleum, hydrogen sulfide will be present. Depending on the crude feedstock and the treatment chemicals used, the wastewater will contain varying amounts of chlorides, sulfides, bicarbonates, ammonia, hydrocarbons, phenol, and suspended solids. If diatoma-ceous earth is used in filtration, exposures should be minimized or controlled. 

The activity of chlorine as a bactericide is decreased by the presence of large quantities of algal slimes and certain process leaks (for example, hydrogen sulfide from petrochemical industries, ammonium compounds from fertilizer production, or citrates from the bioengineering manufacture of citric acid, but not hydrocarbon oil leaks from an oil refinery). 

The reductive process is the more traditional process for tire pyrolysis. This process excludes all sources of oxygen and relies on the reactor heat alone to decompose the tires. Some processors pressurize the reactor with an inert gas such as nitrogen to prevent air from leaking into the reactor, while some inject hydrogen to react with the sulfur present in the rubber in the tires to form hydrogen sulfide. Hydrogen sulfide can be recovered and sold as a by-product. 

Since hydrogen sulfide is highly toxic and a leak from the pipeline could be catastrophic, it is recommended that the line be kept as short as possible. The disposal well should be near the plant, but off-site. The pipeline should therefore be from several hundred meters to two... 

The compound formed in this reaction is hydrogen sulfide (H2S)- Hydrogen sulfide has one of the best known odors of all compounds. It smells like rotten eggs. Hydrogen sulfide is added to natural gas (methane) used in homes for cooking and heating. Methane is odorless, so the unique smell of hydrogen sulfide makes it easy to know when there is a methane leak. 

---