Hydrogen peroxide with ammonium molybdate

From the thioether with hydrogen peroxide and ammonium molybdate in aqueous perchloric acid See Cheronis, p 641... 

Benzyl phenyl sulphide, norbornene, cw-cyclooctene, and 4-vinyl-1-cyclohexene were obtained from Aldrich and (IS)-(-)-a-pinene from Fluka. Phenyl sulphide was prepared from benzene and sulphur chloride following the literature procedure[9]. Reference samples of sulphoxides and sulphones were prepared by oxidation of sulphides with sodium periodate[10] and hydrogen peroxide[ll] respectively. Reference samples of epoxides were made by following Kaneda et al.[ 2 procedure. Metal phthalocyanines[13] were prepared from appropriate metal salt, 1,2-dicyanobenzene with ammonium molybdate as catalyst and were characterized by elemental analysis. 

Better results are obtained by transferring 25.0 mL of the diluted hydrogen peroxide solution to a conical flask, and adding 100 mL 1M(1 20) sulphuric acid. Pass a slow stream of carbon dioxide or nitrogen through the flask, add 10 mL of 10 per cent potassium iodide solution, followed by three drops of 3 per cent ammonium molybdate solution. Titrate the liberated iodine immediately with standard 0.1M sodium thiosulphate in the usual way. 

Molybdenum and Tungsten Peroxide Compounds. Pour ammonium molybdate and sodium tungstate solutions into separate test tubes, acidify them with sulphuric acid, and add several drops of a 1 % hydrogen peroxide solution to each tube. How does the colour of the solutions change Write the equations of the reactions. 

Several procedures for this chemoselective oxidation utilize molybdenum-based catalysts, with either hydrogen peroxide or r-butyl hydroperoxide as the stoichiometric oxidant. These include ammonium molybdate in the presence of a ph e transfer reagent and hydrogen peroxide, which with pH control (potassium carbonate) will selectively oxidize a secondary alcohol in the presence of a primary alcohol without oxidizing alkenes. In addition hindered alcohols are oxidized in preference to less hindered ones (Scheme 18). 

The phase-transfer-assisted permanganate oxidation of alkynes and alkenes has been reviewed. Terminal and internal alkynes are oxidized to 1,2-dicarbonyl compounds by the combined action of diphenyl disulphide, ammonium peroxidisulphate and water or by sodium periodate in the presence of ruthenium dioxide (equation 34). Other reagents for the conversion of acetylenes into 1,2-dicarbonyl compounds are hydrogen peroxide in the presence of (2,6-dicarboxylatopyridine)iron(II), the complex oxo(A, A -ethylenebissalicylideneiminato)chromium(V) trifluoromethanesulphonate (216)and ruthenium tetroxide as a mediator in electrooxidation. l-Acetoxyalkan-2-ones 217 are obtained by the oxidation of terminal acetylenes with sodium perborate and mercury(II) acetate in acetic acid ". Terminal alkynes give a-ketoaldehydes 218 on treatment with dilute hydrogen peroxide, combined with mercury(II) acetate and sodium molybdate or sodium tungstate under phase-transfer conditions. ... 

---