High flow conditions

For trays with inlet weirs, seal values may be reduced if necessary for high flow conditions. A good tray design is centered about a 1.5-in. clearance distance between tray floor and bottom of downcomer edge. 

Concentrations of total phosphorous (TP) mostly exceeded those of DRP and exhibit a different pattern (Fig. 5). During high flow conditions, concentrations of TP and SS both show high values that indicate a good correlation between these two chemical parameters. As an extreme, the weekly sample during a high flow event... 

In studying compatibility of oxidizers, both static and dynamic tests are conducted. An oxidizer such as chlorine trifluoride is particularly troublesome under flow conditions, although it can be stored under static conditions rather easily because of the firm fluoride film it forms. If this film is cracked so that continuity no longer exists, burnout under high flow conditions can occur. 

Kuji river water (high-flow condition) 65% (by Cs) Comparison with sedimentation in a tank followed by decantation... 

Care must be taken in implementing PVST, particularly in high-energy conditions. In very high flow conditions the partial stroke test of the SIS valve could incur a response in the BPCS system and the resetting of the PVST could introduce an additional variable to the BPCS. This could impact otherwise unknown instabilities in the BPCS or SIS sensing system leading to a spurious trip. 

Armor contaminated sediments to ensme they are not resuspended in high flow conditions... 

This wouldn t be the last time the problem of N s triple bond would be solved. It would recur in human history, and reshape the twentieth century, although not necessarily for the better. A scientist named Fritz Haber heated and pressurized nitrogen and hydrogen under high-flow conditions with an iron catalyst. Through this display of brute chemical force, Haber forced the triple bond of apart and made NH (ammo-... 

---