Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

High abrasion furnace black

Hycar OR-15, 30 high abrasion furnace black, 10 zinc oxide, 0.5 tetramethyl thiuramdisulfide, 1.5 sulfuric 30min at 153° C Methyl methacrylate 49 — — —... [Pg.41]

HAF (high abrasion furnace black) Highly reinforcing furnace carbon black increasing resisfance of a rubber compound to abrasion. [Pg.255]

HAF (high-abrasion furnace black) highly reinforcing furnace carbon black increasing resistance of a rubber compound to abrasion, heat aging exposure of polymeric materials under specified conditions (temperature, time, presence or absence of air or oxygen, etc.) then testing them... [Pg.205]

Carbon black high abrasion furnace black (N330) from Phillips Carbon Black Limited. [Pg.826]

N326 black Cabot High abrasion furnace black. [Pg.51]

GMA glycidyl methacrylate HAF high abrasion furnace (black)... [Pg.596]

A short study was made as to the ability of these reactive particles to act as reinforcing fillers for elastomers. A styrenic filler with peracetate functionality was substituted for a high abrasion furnace black in a typical SBR formulation. Only 28 phr of the styrenic filler was used as compared to 40 phr of the carbon black to compensate for the density differences. As can be seen by the results of Table 9, the reactive styrenic particle acts as a reinforcing filler for SBR. [Pg.400]

Figure 34 Logarithm of the storage modulus and tan S against temperature for HAF (High Abrasion Furnace) black filled natural rubber (40 parts black per 100 of rubber) bending at I Hz... Figure 34 Logarithm of the storage modulus and tan S against temperature for HAF (High Abrasion Furnace) black filled natural rubber (40 parts black per 100 of rubber) bending at I Hz...
Figure 40 Shear storage modulus against double strain amplitude showing components of for natural rubber filled with HAF (High Abrasion Furnace) black (40 parts of by weight black to 1(X) of rubber) at 21 °C and 0.3 Hz... Figure 40 Shear storage modulus against double strain amplitude showing components of for natural rubber filled with HAF (High Abrasion Furnace) black (40 parts of by weight black to 1(X) of rubber) at 21 °C and 0.3 Hz...
HAF-HS High abrasion furnace black (high structure)... [Pg.388]

FPM 1. Elastomeric copolymer from vinylidene HAF High abrasion furnace black... [Pg.2253]

See other pages where High abrasion furnace black is mentioned: [Pg.544]    [Pg.320]    [Pg.320]    [Pg.384]    [Pg.173]    [Pg.215]    [Pg.336]    [Pg.117]    [Pg.358]    [Pg.144]    [Pg.388]    [Pg.388]   
See also in sourсe #XX -- [ Pg.140 ]



SEARCH



Furnace blacks

© 2024 chempedia.info