Hebb-Wagner polarization experiment

When performing a Hebb-Wagner polarization experiment one has to take the following aspects into careful consideration ... 

Similar approaches are used for most steady-state measurement techniques developed for mixed ionic-electronic conductors (see -> conductors and -> conducting solids). These include the measurements of concentration-cell - electromotive force, experiments with ion- or electron-blocking electrodes, determination of - electrolytic permeability, and various combined techniques [ii-vii]. In all cases, the results may be affected by electrode polarization this influence should be avoided optimizing experimental procedures and/or taken into account via appropriate modeling. See also -> Wagner equation, -> Hebb-Wagner method, and -> ambipolar conductivity. 

While in the experiments described so far both ionic and electronic species are transferred, it is also possible to determine the partial electronic conductivity by using ionically blocking electrodes to suppress the ionic transport so that only electrons and holes can pass. This technique is known as the asymmetric polarization or Hebb-Wagner technique. By using a chemically inert electronic conducting material, no ions will be delivered to the electrolyte when a voltage is applied with such a polarization that the mobile ions tend to be depleted at the inert electrode. An electrode used on the other side fixes the chemical potential of the mobile component of the electrolyte by the applied voltage at that phase boundary. 

---