Gravity filling

For most powders, static discharges are expected to occur when powders are transferred in bulk, even under gravity filling conditions. The reasons that static discharges are normally tolerable are... 

The process above forms the basis of counter-pressure filling of carbonated liquids into a container. To achieve gravity filling the pressure within the filling... 

Routing and sealing are used when cracks are linear or almost linear, so that the saw cutter can operate easily. Sealing, after thorough cleaning, is carried out using gravity fill polymers. 

Gravity fill is also used when cracking is random or patterned. The material normally used is gravity polymer covered with hard and durable sand. Epoxy resin-based materials instead of elastomer/plastomer-based materials are preferred when a longer-lasting surface skid resistance is required. However, this method of repair can be very expensive. 

Observe the foree of gravity, fill the moulded part from bottom to top in order to achieve the desired swell flow. 

---