Glyoxal oxidation

However, the interpretation of these results is not obvious, but some remarks must be made. Glyoxal oxidation and oxygen evolution occur simultaneously and this competition may play a significant role on the selectivity. In the studied potential range and at the beginning of oxygen evolution, the competition appears to be, at first, favourable for GA production, but this seems to be maximum for an optimal potential. In other... 

Pig heart Lactate DH -17.5 -11.6 0.9 Glyoxalate reduction Pyruvate reduction/lactate oxidation Glyoxalate oxidation 430 192/85 115 Rel 71... 

A series of monometallic Pd(5wt%)/C and bimetallic Au(5wt%)-Pd(5wt%)/C catalysts were then prepared by controlling the pH of the solutions in order to keep it at the optimal values (i.e. in the maximum adsorption range) throughout all synthetic steps. These catalysts were tested in glyoxal oxidation and representative catalytical results are listed in Table 2. The Pd/C catalysts were indeed sensitive to the pH values used in the preparation steps. For example, a catalyst prepared with an acidic starting pH (n°l) was more active... 

In this work, we have shown that Pd/C and Au-Pd/C catalysts prepared in an optimized fashion by controlled adsorption, by taking into account the influence of the support PZC and the nature of metal species present in solution, are very active in glyoxal oxidation. This behavior may be explained in terms of an electrostatic model where maximum adsorption occurs when there is no charge mismatch between the carbon support and the Pd species in solution. The catalysts obtained display a homogeneous distribution of small metallic particles and are characterized by high Pd/C surface ratios and by an important degree of Pd reduction. 

Acetaldehyde, first used extensively during World War I as a starting material for making acetone [67-64-1] from acetic acid [64-19-7] is currendy an important intermediate in the production of acetic acid, acetic anhydride [108-24-7] ethyl acetate [141-78-6] peracetic acid [79-21 -0] pentaerythritol [115-77-5] chloral [302-17-0], glyoxal [107-22-2], aLkylamines, and pyridines. Commercial processes for acetaldehyde production include the oxidation or dehydrogenation of ethanol, the addition of water to acetylene, the partial oxidation of hydrocarbons, and the direct oxidation of ethylene [74-85-1]. In 1989, it was estimated that 28 companies having more than 98% of the wodd s 2.5 megaton per year plant capacity used the Wacker-Hoechst processes for the direct oxidation of ethylene. 

Oxidation. Acetaldehyde is readily oxidised with oxygen or air to acetic acid, acetic anhydride, and peracetic acid (see Acetic acid and derivatives). The principal product depends on the reaction conditions. Acetic acid [64-19-7] may be produced commercially by the Hquid-phase oxidation of acetaldehyde at 65°C using cobalt or manganese acetate dissolved in acetic acid as a catalyst (34). Liquid-phase oxidation in the presence of mixed acetates of copper and cobalt yields acetic anhydride [108-24-7] (35). Peroxyacetic acid or a perester is beheved to be the precursor in both syntheses. There are two commercial processes for the production of peracetic acid [79-21 -0]. Low temperature oxidation of acetaldehyde in the presence of metal salts, ultraviolet irradiation, or osone yields acetaldehyde monoperacetate, which can be decomposed to peracetic acid and acetaldehyde (36). Peracetic acid can also be formed directiy by Hquid-phase oxidation at 5—50°C with a cobalt salt catalyst (37) (see Peroxides and peroxy compounds). Nitric acid oxidation of acetaldehyde yields glyoxal [107-22-2] (38,39). Oxidations of /)-xylene to terephthaHc acid [100-21-0] and of ethanol to acetic acid are activated by acetaldehyde (40,41). 

Ozonation of Aromatics. Aromatic ring unsaturation is attacked much slower than olefinic double bonds, but behaves as if the double bonds in the classical Kekule stmctures really do exist. Thus, benzene yields three moles of glyoxal, which can be oxidized further to glyoxyUc acid and then to oxahc acid. Substituted aromatics give mixtures of aUphatic acids. Ring substituents such as amino, nitro, and sulfonate are cleaved during ozonation. 

Many pyrazine and quinoxaline syntheses yield mono- or di-N-oxides (76H(4)769). The condensation of a-aminooximes with 1,2-diketones results in the direct formation of pyrazine mono-N-oxides. The a-aminooximes themselves are not easily prepared but 2-amino-2-deoxy sugars readily form the oximes, which have been condensed with glyoxal to yield the pyrazine 4-oxides (Scheme 18) (72JOC2635, 80JOC1693). 

Muconic acid has been obtained in a variety of ways. The procedures that seem most important from a preparative point of view are by treatment of ethyl o ,5-dibromoadipate with alcoholic potassium hydroxide, by condensation of glyoxal (as the sodium bisulfite addition product) with malonic acid, by heating ethyl l-acetoxy-l,4-dihydromuconate (obtained by condensing ethyl oxalate and ethyl crotonate, acetylating, and reducing),and by oxidation of phenol with peracetic acid. ... 

Diphenyl-1,2,4-triazine 4-oxide 139 was obtained by reaction of diphenyl-glyoxal mono-2-ethoxymethylenehydrazone 140 with hydroxylamine. The reaction proceeds via formation of an isonitroso intermediate, followed by cyclization to the 1,2,4-triazine 4-oxide 139 (71LA12). 

Two pieces of chemical evidence support the three-membered ring formulation. The bifunctional oxazirane prepared from glyoxal, tert-butylamine, and peracetic acid (6) can be obtained in two crystalline isomeric forms. According to the three-membered ring formula there should be two asymmetric carbon atoms which should allow the existence of meso and racemic forms. A partial optical resolution was carried out with 2-7i-propyl-3-methyl-3-isobutyloxazirane. Brucine was oxidized to the N-oxide with excess of the oxazirane. It was found that the unused oxazirane was optically active. 

The reaction of ozone with an aromatic compound is considerably slower than the reaction with an alkene. Complete ozonolysis of one mole of benzene with workup under non-oxidative conditions will yield three moles of glyoxal. The selective ozonolysis of particular bonds in appropriate aromatic compounds is used in organic synthesis, for example in the synthesis of a substituted biphenyl 8 from phenanthrene 7 ... 

The isomer of isoproterenol in which both aromatic hydroxyl groups are situated meta to the side chain also exhibits bron-chiodilating activity. Oxidation of 3,5-dimethoxyacetophenone by means of selenium dioxide affords the glyoxal derivative (15). Treatment of the aldehyde with isopropylamine in the presence of... 

Dicarbonyls. A third area of uncertainty is the treatment of dicarbonyls formed from aromatic or terpene hydrocarbon oxidation. (The simplest is glyoxal, CHOCHO, but a large number have been identified, 47. The yields and subsequent reactions of these compounds represent a major area of uncertainty in urban air photochemistry (186) and since they may be a significant source of HOjj through photolysis, inaccuracies in their portrayal may result in errors in calculated values of HO. and HO2.. 

An interesting study examined the anodic oxidation of EDTA at alkaline pH on a smooth platinum electrode (Pakalapati et al. 1996). Degradation was initiated by removal of the acetate side chains as formaldehyde, followed by deamination of the ethylenediamine that formed glyoxal and oxalate. Oxalate and formaldehyde are oxidized to CO2, and adsoption was an integral part of the oxidation. 

---