Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Glycerol 131 Iron production

Benzanthrone has been prepared by three general methods, the first of which is generally regarded as the best (i) by heating a reduction product of anthraquinone with sulfuric acid and glycerol,1 or with a derivative of glycerol, or with acrolein. The anthraquinone is usually reduced in sulfuric acid solution, just prior to the reaction, by means of aniline sulfate, iron, , or copper. It has also been prepared (2) by the action of aluminum or ferric chloride on phenyl-a-naphthyl ketone, and (3) from i-phenylnaphthalene-2-carboxylic acid. ... [Pg.6]

Several supported metalhc catalysts were evalrrated for the selective hydrogenolysis of glycerol. Initially, the reactions were performed tmder acidic conditions in order to promote the formation of 1,3-PDO. Rutheniirm-based catalysts were found to be the most active catalysts but significant amount of tmdesired products resulted from C-C cleavages were detected. On the contrary, Rh/C catalysts were found selective to C-O cleavages. As far as the selectivity to 1,3-PDO was concerned, we previously reported that the addition of iron salts in the medium improved the l,3-PDO/l,2-PDO selectivity (11). A systematic study on the influence of additives was therefore carried out in the present investigation. Mineral and organic acids were evaluated for this purpose (Table 35.1). [Pg.314]

CA 65, 3662-63(1966) [improvements in the production of expl mixts contg water-sol salts (such ss AH or INte nicrs te) with o t n(J cy tc cake and harden, can be achieved by incorporation of 1—5.% of a mixt of highrmol-wt fatty ales and fatty acid-glycerol esters- E-g AN 60, NaN03 10, DNT 15, NGc 10, sol NC 0.3, fatty alc/ester mixt 1.7, woodmeal 2 red iron oxide 1%]... [Pg.567]

A large amount of rice bran caused excessive fungal growth rather than enhance fumaric acid production. In addition, we could produce fumaric acid without the addition of zinc and iron. Fungal culture broth containing approx 25 g/L of fumaric acid was directly employed for succinic acid conversion. The amount of glycerol and yeast extract required for succinic acid conversion was reduced to 70 and 30%, respectively, compared with the amounts cited in previous studies. [Pg.843]


See other pages where Glycerol 131 Iron production is mentioned: [Pg.157]    [Pg.390]    [Pg.225]    [Pg.299]    [Pg.1400]    [Pg.694]    [Pg.695]    [Pg.1186]    [Pg.854]    [Pg.1186]    [Pg.41]    [Pg.91]    [Pg.314]    [Pg.1081]    [Pg.3230]    [Pg.397]    [Pg.431]    [Pg.225]    [Pg.417]    [Pg.271]    [Pg.131]    [Pg.111]    [Pg.83]    [Pg.583]    [Pg.357]    [Pg.82]    [Pg.504]    [Pg.178]    [Pg.425]    [Pg.334]    [Pg.140]    [Pg.370]    [Pg.166]    [Pg.237]   
See also in sourсe #XX -- [ Pg.33 ]




SEARCH



Glycerol production

Iron production

Iron products

© 2024 chempedia.info