Glass melting borates

This process was developed by Toshiba [5.36]. The starting materials for barium ferrite production are dissolved in a borate glass melt. The molten material at ca. 

Lead borate moaohydrate [14720-53-7] (lead metaborate), Pb(B02)2 H20, mol wt 310.82, d = 5.6g/cm (anhydrous) is a white crystalline powder. The metaborate loses water of crystallization at 160°C and melts at 500°C. It is iasoluble ia water and alkaHes, but readily soluble ia nitric and hot acetic acid. Lead metaborate may be produced by a fusion of boric acid with lead carbonate or litharge. It also may be formed as a precipitate when a concentrated solution of lead nitrate is mixed with an excess of borax. The oxides of lead and boron are miscible and form clear lead-borate glasses in the range of 21 to 73 mol % PbO. 

Lithium Borates. Lithium metaborate [13453-69-5], LLBO2 2H20, is prepared from reaction of lithium hydroxide and boric acid. It is used as the fluxing agent for the matrix for x-ray fluorescence analytical techniques and in specialty glasses and enamels. The anhydrous salt melts at 847°C. 

A number of reviews have appeared covering the various aspects of borate glasses. The stmcture, physical properties, thermochemistry, reactions, phase equihbria, and electrical properties of alkah borate melts and glasses have been presented (73). The apphcation of x-ray diffraction, nmr, Raman scattering, in spectroscopy, and esr to stmctural analysis is available (26). Phase-equihbrium diagrams for a large number of anhydrous borate systems are included in a compilation (145), and thermochemical data on the anhydrous alkah metal borates have been compiled (17). 

The blue color of 83 has been observed in numerous experiments. For example, a brilliant blue color occurs if a potassium thiocyanate melt is heated to temperatures above 300 °C [132] or if eutectic melts of LiCl-KCl (containing some sulfide) are in contact with elemental sulfur [132, 133], if aqueous sodium tetrasulfide is heated to temperatures above 100 °C [134], if alkali polysulfides are dissolved in boiling ethanol or in polar aprotic solvents (see above), or if borate glasses are doped with elemental sulfur [132]. In most of these cases mixtures of much 83 and little 82 will have been present demonstrating the ubiquitous nature of these radicals [12]. 

The char layer from a burning polymer, while it exerts protective action, is itself vulnerable to oxidation. This can manifest itself either during flaming combustion as a constant destruction of the char as it forms, or as afterglow. Means for prevention of this undesired char destruction have been reported. In studies on preventing combustion of carbon fibers, incorporation of borates, phosphates, or low melting glasses has been shown to be effective (12, 13). 

Schubert DM, Alam F, Visi M, Knobler CB (2003) Chemistry of Materials, in press Bray PJ (1997) In Wright AC, Feller SA, Hannon AC (eds). Borate Glasses, Crystals Melts. Society of Glass Technology, Sheffield... 

Aluminum borate whiskers are produced commercially by an external flux method. Chlorides, sulfates, or carbonates of alkali metals are added to alumina and boric oxide (or boric acid) and the mixture is heated to 800°C-1000°C to produce aluminum borate whisker (length 10-30 pm and diameter 0.5-1.0 pm). It has a melting point of 1440°C, a very low coefficient of thermal expansion, and an excellent chemical resistance toward acids. The aluminum borate whisker was reported to be effective in improving not only the thermal degradation but also the glass transition temperature of epoxy76... 

Molten sodium borate or boric oxide (a low-melting glass) can cover and stabilize the unburned substrate/char and inhibit oxygen permeation. 

---