Glass-ceramic matrices lithium aluminosilicate

Most structural PMCs consist of a relatively soft matrix, such as a thermosetting plastic of polyester, phenolic, or epoxy, sometimes referred to as resin-matrix composites. Some typical polymers used as matrices in PMCs are listed in Table 1.28. The list of metals used in MMCs is much shorter. Aluminum, magnesium, titanium, and iron- and nickel-based alloys are the most common (see Table 1.29). These metals are typically utilized due to their combination of low density and good mechanical properties. Matrix materials for CMCs generally fall into fonr categories glass ceramics like lithium aluminosilicate oxide ceramics like aluminnm oxide (alnmina) and mullite nitride ceramics such as silicon nitride and carbide ceramics such as silicon carbide. 

Recent advances further enhance their commercial potential in metal matrix composites such as aluminum, nickel, and copper ceramic matrix composites, such as alumina, zirconia and silicon nitride and glass ceramic matrix composites such as lithium aluminosilicate. Silicon carbide whiskers increase strength, reduce crack propagation, and add structural reliability in ceramic matrix composites. Structural applications include cutting tool inserts, wear parts, and heat engine parts. They increase strength and stiffness of a metal, and support the design of metal matrix composites with thinner cross sections than those of the metal parts they replace, but with equal properties in applications such as turbine blades, boilers and reactors. 

A range of glass-ceramics, each having different crystalline phases, has been used as the matrix material. The most widely used matrices are based on the lithium aluminosilicate (LAS) system. The constituents of typical glass-ceramic matrices are given in Table 3.12. 

---