Freeze-dried polymeric matrices

Some authors have named the polymeric matrices fabricated via conventional freeze-drying by the term cryogels. Certainly, freezing of polymeric solutions or colloidal dispersions causes solid-liquid phase separation, and the subsequent sublimation of the solidified solvent crystals fixes the system thus structured [17, 18], but no gelation occurs during these consecutive steps. Therefore, it is more correct to call such freeze-dried polymeric matrices cryostructurates or cryotexturates rather than cryogels. ... 

Steam-solvent distillation using diethyl ether has been used to remove and analyse for odour and taint from additives in food packaging films. Another technique that has been used is vacuum/thermal extraction. This procedure has been applied to polyamides and fluorocarbon polymers. The procedure is used for the direct isolation or release of volatile components from a polymeric matrix and may involve the combined use of vacuum and heat, as for example in the mass spectrometer direct insertion probe or during dry vacuum distillation. Alternatively, the volatiles may be swept from the heated sample by a flow of inert gas for concentration by freeze trapping and/or collection on to a solid adsorbent prior to thermal or solvent desorption for GC or mass spectrometric (MS) examination. 

Latex is a colloidal dispersion of polymer in an aqueous solvent. This method is more suitable for those polymers that can be prepared via emulsion polymerization or those that have the ability to form emulsion. It consists of an aqueous dispersion/ stabilization of filler using a surfactant followed by the addition of the dispersed filler into the polymer latex. Nanocomposites can be obtained after freeze-drying the above mixture followed by melt processing. The latex method has several advantages including no requirement for organic solvent, reliability, ease of processing, and improved dispersion of the filler in the viscous polymer matrix [70]. 

---