Fluoroelastomers poly

Abstract In this paper the synthesis, properties and applications of poly(organophos-phazenes) have been highlighted. Five different classes of macromolecules have been described, i.e. phosphazene fluoroelastomers, aryloxy-substituted polymeric flame-retardants, alkoxy-substituted phosphazene electric conductors, biomaterials and photo-inert and/or photo-active phosphazene derivatives. Perspectives of future developments in this field are briefly discussed. 

In the case of poly(alkoxyphosphazenes) (IV) or poly(aryloxyphos-phazenes) (V) a dramatic change in properties can arise by employing combinations of substituents. Polymers such as (NP CHjCF ) and (NP CgH,).) are semicrystalline thermoplastics (Table I). With the introduction of two or more substituents of sufficiently different size, elastomers are obtained (Figure 4). Another requirement for elastomeric behavior is that the substituents be randomly distributed along the P-N backbone. This principle was first demonstrated by Rose (9), and subsequent work in several industrial laboratories has led to the development of phosphazene elastomers of commercial interest. A phosphazene fluoroelastomer and a phosphazene elastomer with mixed aryloxy side chains are showing promise for military and commercial applications. These elastomers are the subject of another paper in this symposium (10). 

Fluorocarbon elastomers represent the largest group of fluoroelastomers. They have carbon-to-carbon linkages in the polymer backbone and a varied amount of fluorine in the molecule. In general, they may consist of several types of monomers poly-vinylidene fluoride (VDF), hexafluoropropylene (HFP), trifluorochloroethylene (CTFE), polytetrafluoroethylene (TFE), perfluoromethylvinyl ether (PMVE), ethylene or propylene.212 Other types may contain other comonomers, e.g., 1,2,3,3,3-pentafluropropylene instead of HFP.213 Fluorocarbon elastomers exhibit good chemical and thermal stability and good resistance to oxidation. 

HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HNS NTO NTO/HMX NTO/HMX NTO/HMX PETN PETN PETN PETN PETN PETN PETN PETN PETN PETN RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX TATB/HMX Cariflex (thermoplastic elastomer) Hydroxy-terminated polybutadiene (polyurethane) Hydroxy-terminated polyester Kraton (block copolymer of styrene and ethylene-butylene) Nylon (polyamide) Polyester resin-styrene Polyethylene Polyurethane Poly(vinyl) alcohol Poly(vinyl) butyral resin Teflon (polytetrafluoroethylene) Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Cariflex (block copolymer of butadiene-styrene) Cariflex (block copolymer of butadiene-styrene) Estane (polyester polyurethane copolymer) Hytemp (thermoplastic elastomer) Butyl rubber with acetyl tributylcitrate Epoxy resin-diethylenetriamine Kraton (block copolymer of styrene and ethylene-butylene) Latex with bis-(2-ethylhexyl adipate) Nylon (polyamide) Polyester and styrene copolymer Poly(ethyl acrylate) with dibutyl phthalate Silicone rubber Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Epoxy ether Exon (polychlorotrifluoroethylene/vinylidine chloride) Hydroxy-terminated polybutadiene (polyurethane) Kel-F (polychlorotrifluoroethylene) Nylon (polyamide) Nylon and aluminium Nitro-fluoroalkyl epoxides Polyacrylate and paraffin Polyamide resin Polyisobutylene/Teflon (polytetrafluoroethylene) Polyester Polystyrene Teflon (polytetrafluoroethylene) Kraton (block copolymer of styrene and ethylene-butylene)... 

Perfluoro rubbers of the poly- methylene type having all substituent groups on the polymer chain either fluoro, perfluoroalkyl, or perfluoroalkoxy groups Fluoroelastomer FFKM... 

Applications of poly[(fluoroalkoxy)phosphazenes] in dentistry have also been reported (Dootz et al, 1992 Kawano et al, 1994). The use of a polyphosphazene fluoroelastomer as denture liner for the covering of dental prosthesis has been described. This material is known under the name of Novus (Hygenic Corp. Akron, USA). 

After the dehydroliuorination of the poly(VDF-co-HFP) copolymer, the amine can add across the unsaturated center. Addition can be carried out with primary and secondary diamine, and less readily with primary and secondary monoamines. Vulcanization of VDF-based fluoroelastomers is induced by secondary and tertiary monoamines [20]. 

Fluoroelastomers are useful as processing aids. The fluoropoly-mers are normally in the fluid state at room temperature (2). The effect of the addition of an elastomer to linear low density poly(eth-ylene) (LLDPE) is shown in Figure 11.1. 

In poly(olefin)s, fluoroelastomers are added sometimes as processing aids. It is believed that the fluoroelastomer and acid scavenger may have an unexpected effect as they modify the blocking and friction properties of the polymer synergistically (4). 

Poly((2-trifluoroethoxy)( 1 -difluoro-2,3,4-hexafluoropentoxy) phosphazene) Phosphonitrilic fluoroelastomers... 

---