Fluidized bed mixing

Granulate the mixture I with Kollicoat SR30D (II) in a fluidized bed, mix with the components of III and press with medium compression force. 

Mixed flow with integrated fluidized beds Mixed flow (fountain type) Countercurrent flow... 

The performance of fluidized-bed reactors is not approximated by either the well-stirred or plug-flow idealized models. The solid phase tends to be well-mixed, but the bubbles lead to the gas phase having a poorer performance than well mixed. Overall, the performance of a fluidized-bed reactor often lies somewhere between the well-stirred and plug-flow models. 

By contrast, if the reactor is continuous well-mixed, then the reactor is isothermal. This behavior is typical of stirred tanks used for liquid-phase reactions or fluidized-bed reactors used for gas-phase reactions. The mixing causes the temperature in the reactor to be effectively uniform. 

Fluid Coking", developed in 1953. The reaction proceeds at atmospheric pressure, at about SOO-SSOT, in a reactor whose feed is mixed in a fluidized bed of hot coke which maintains the desired temperature. 

Gas—solids fluidization is the levitation of a bed of solid particles by a gas. Intense soflds mixing and good gas—soflds contact create an isothermal system having good mass transfer (qv). The gas-fluidized bed is ideal for many chemical reactions, drying (qv), mixing, and heat-transfer appHcations. Soflds can also be fluidized by a Hquid or by gas and Hquid combined. Liquid and gas—Hquid fluidization appHcations are growing in number, but gas—soHds fluidization appHcations dominate the fluidization field. This article discusses gas—soHds fluidization. 

Fluidized-bed reactor systems put other unique stresses on the VPO catalyst system. The mixing action inside the reactor creates an environment that is too harsh for the mechanical strength of a vanadium phosphoms oxide catalyst, and thus requires that the catalyst be attrition resistant (121,140,141). To achieve this goal, vanadium phosphoms oxide is usually spray dried with coUoidal siUca [7631-86-9] or polysiUcic acid [1343-98-2]. Vanadium phosphoms oxide catalysts made with coUoidal sUica are reported to have a loss of selectivity, while no loss in selectivity is reported for catalysts spray dried with polysUicic acid (140). 

Fresh butane mixed with recycled gas encounters freshly oxidized catalyst at the bottom of the transport-bed reactor and is oxidized to maleic anhydride and CO during its passage up the reactor. Catalyst densities (80 160 kg/m ) in the transport-bed reactor are substantially lower than the catalyst density in a typical fluidized-bed reactor (480 640 kg/m ) (109). The gas flow pattern in the riser is nearly plug flow which avoids the negative effect of backmixing on reaction selectivity. Reduced catalyst is separated from the reaction products by cyclones and is further stripped of products and reactants in a separate stripping vessel. The reduced catalyst is reoxidized in a separate fluidized-bed oxidizer where the exothermic heat of reaction is removed by steam cods. The rate of reoxidation of the VPO catalyst is slower than the rate of oxidation of butane, and consequently residence times are longer in the oxidizer than in the transport-bed reactor. 

In TBP extraction, the yeUowcake is dissolved ia nitric acid and extracted with tributyl phosphate ia a kerosene or hexane diluent. The uranyl ion forms the mixed complex U02(N02)2(TBP)2 which is extracted iato the diluent. The purified uranium is then back-extracted iato nitric acid or water, and concentrated. The uranyl nitrate solution is evaporated to uranyl nitrate hexahydrate [13520-83-7], U02(N02)2 6H20. The uranyl nitrate hexahydrate is dehydrated and denitrated duting a pyrolysis step to form uranium trioxide [1344-58-7], UO, as shown ia equation 10. The pyrolysis is most often carried out ia either a batch reactor (Fig. 2) or a fluidized-bed denitrator (Fig. 3). The UO is reduced with hydrogen to uranium dioxide [1344-57-6], UO2 (eq. 11), and converted to uranium tetrafluoride [10049-14-6], UF, with HF at elevated temperatures (eq. 12). The UF can be either reduced to uranium metal or fluotinated to uranium hexafluoride [7783-81-5], UF, for isotope enrichment. The chemistry and operating conditions of the TBP refining process, and conversion to UO, UO2, and ultimately UF have been discussed ia detail (40). 

There are essentially three types of coal gasifiers moving-bed or countercurrent reactors fluidized-bed or back-mixed reactors and entrained-flow or plug-flow reactors. The three types are shown schematically in Eigure 2. 

Dried coal is pneumatically conveyed to feed bins, pressurized through lockhoppers, and fed to the refractory-lined fluidized-bed gasifier vessel by variable-speed screws. The gasifying agent, mixed oxygen and steam, is fed near the bottom of the gasifier. The bed operates at 2.5 MPa (25 bar) and... 

Fluidized Beds When gas or liquid flows upward through a vertically unconstrained bed of particles, there is a minimum fluid velocity at which the particles will begin to move. Above this minimum velocity, the bed is said to be fluidized. Fluidized beds are widely used, in part because of their excellent mixing and heat and mass transfer characteristics. See Sec. 17 of this Handbook for detailed information. 

Spouted Beds The spoutedT)ed technique was developed primarily for sohds which are too coarse to be handled in fluidized beds. Although their applications overlap, the methods of gas-sohds mixing... 

In some cases, it is impractical to use a plenum chamber under the constriction plate. This condition arises when a flammable or explosive mixture of gases is being introduced to the reactor. One solution is to pipe the gases to a multitude of individual gas inlets in the floor of the reactor. In this way it may be possible to maintain the gas velocities in the pipes above the flame velocity or to reduce the volume of gas in each pipe to the point at which an explosion can be safely contained. Another solution is to provide separate inlets for the different gases and depend on mixing in the fluidized bed. The inlets should be fairly close to one another, as lateral gas mixing in fluidized beds is poor. 

---