Flotation of metallic minerals

Clearly, it is important that there be a large contact angle at the solid particle-solution-air interface. Some minerals, such as graphite and sulfur, are naturally hydrophobic, but even with these it has been advantageous to add materials to the system that will adsorb to give a hydrophobic film on the solid surface. (Effects can be complicated—sulfur notability oscillates with the number of preadsoibed monolayers of hydrocarbons such as n-heptane [76].) The use of surface modifiers or collectors is, of course, essential in the case of naturally hydrophilic minerals such as silica. 

Perxanthate ion may also be implicated [59]. Even today, the exact nature of the surface reaction is clouded [59, 79-81], although Gaudin [82] notes that the role of oxygen is very determinative in the chemistry of the mineral-collector interaction. 

Very finely divided minerals may be difficult to purify by flotation since the particles may a ere to larger, undesired minerals—or vice versa, the fines may be an impurity to be removed. The latter is the case with Ii02 (anatase) impurity in kaolin clay [87]. In carrier flotation, a coarser, separable mineral is added that will selectively pick up the fines [88,89]. The added mineral may be in the form of a floe (ferric hydroxide), and the process is called adsorbing colloid flotation [90]. The fines may be aggregated to reduce their loss, as in the addition of oil to agglomerate coal fines [91]. 

---