Experimental procedure grinding

Keywords bismuth nitrate pentahydrate, iodine, co-grinding Experimental procedures ... 

Ductile-Mode Grinding with 140 Mesh Wheel 2.2.1 Experimental Procedure... 

Related Calculations. This procedure can be used to calculate average sizes, moments, surface area, and mass of solids per volume of slurry for any known particle size distribution. The method can also be used for dry-solids distributions, say, from grinding operations. See Example 10.7 for an example of a situation in which the size distribution is based on an experimental sample rather than on a known size-distribution function. 

A number of experimental alternatives to traditional IR transmission spectroscopy are suitable for overcoming some of these complicating experimental factors. In the technique of diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) (Hartauer et al. 1992 Neville et al. 1992) the sample is dispersed in a matrix of powdered alkali halide, a procedure which is less likely to lead to polymorphic transformations or loss of solvent than the more aggressive grinding necessary for mull preparation or pressure required to make a pellet (Roston et al. 1993). For these reasons, Threlfall (1995) suggests that DRIFTS should be the method of choice for the initial IR examination of polymorphs. He has also discussed the possible use of attenuated total reflection (ATR) methods in the examination of polymorphs and provided a comparison and discussion of the results obtained on sulphathiazole polymorphs from spectra run on KBr disks, Nujol mulls and ATR. 

---