Ethylene from ammoxidation

Cr-ZSM-5 catalysts prepared by solid-state reaction from different chromium precursors (acetate, chloride, nitrate, sulphate and ammonium dichromate) were studied in the selective ammoxidation of ethylene to acetonitrile. Cr-ZSM-5 catalysts were characterized by chemical analysis, X-ray powder diffraction, FTIR (1500-400 cm 1), N2 physisorption (BET), 27A1 MAS NMR, UV-Visible spectroscopy, NH3-TPD and H2-TPR. For all samples, UV-Visible spectroscopy and H2-TPR results confirmed that both Cr(VI) ions and Cr(III) oxide coexist. TPD of ammonia showed that from the chromium incorporation, it results strong Lewis acid sites formation at the detriment of the initial Bronsted acid sites. The catalyst issued from chromium chloride showed higher activity and selectivity toward acetonitrile. This activity can be assigned to the nature of chromium species formed using this precursor. In general, C r6+ species seem to play a key role in the ammoxidation reaction but Cr203 oxide enhances the deep oxidation. 

Other catalytic reactions carried out in fluidized-bed reactors are the oxidation of naphthalene to phthalic anhydride [2, 6, 80] the ammoxidation of isobutane to mcthacrylonitrilc [2] the synthesis of maleic anhydride from the naphtha cracker C4 fraction (Mitsubishi process [81, 82]) or from n-butane (ALMA process [83], [84]) the reaction of acetylene with acetic acid to vinyl acetate [2] the oxychlorination of ethylene to 1,2-di-chloroethane [2, 6, 85, 86] the chlorination of methane [2], the reaction of phenol with methanol to cresol and 2,6-xylenol [2, 87] the reaction of methanol to gasoline... 

The initial drive for acrylonitrile (AN) production (6.2 Mt/a in 2004 worldwide) was the discovery, in the late 1930s, of the synthetic rubber Buna N. Today nitrile rubbers represent only a minor outlet for AN which is utilized primarily for polymerization to give textile fibres (50%) and ABS resins (24%), and for dimerization to adiponitrile (10%). Early industrial processes depended on the addition of hydrogen cyanide to acetylene or to ethylene oxide, followed by the dehydration of intermediate ethylene cyanohydrin. Both processes are obsolete and are now supplanted by the ammoxidation of propylene (Equation 34) introduced in 1960 by Standard Oil of Indiana (Sohio). The reason for the success stems from the effectiveness of the catalyst and because propylene,... 

Supported metal oxides are currently being used in a large number of industrial applications. The oxidation of alkanes is a very interesting field, however, only until recently very little attention has been paid to the oxidation of ethane, the second most abundant paraffin (1). The production of ethylene or acetaldehyde from this feed stock is a challenging option. Vanadium oxide is an important element in the formulation of catalysts for selective cataljdic reactions (e. g. oxidation of o-xylene, 1-3, butadiene, methanol, CO, ammoxidation of hydrocarbons, selective catalytic reduction of NO and the partial oxidation of methane) (2-4). Many of the reactions involving vanadium oxide focus on the selective oxidation of hydrocarbons, and some studies have also examined the oxidation of ethane over vanadium oxide based catalysts (5-7) or reviewed the activity of vanadium oxide for the oxidation of lower alkanes (1). Our work focuses on determining the relevance of the specific oxide support and of the surface vanadia coverage on the nature and activity of the supported vanadia species for the oxidation of ethane. 

Desulfurization of petroleum feedstock (FBR), catalytic cracking (MBR or FI BR), hydrodewaxing (FBR), steam reforming of methane or naphtha (FBR), water-gas shift (CO conversion) reaction (FBR-A), ammonia synthesis (FBR-A), methanol from synthesis gas (FBR), oxidation of sulfur dioxide (FBR-A), isomerization of xylenes (FBR-A), catalytic reforming of naphtha (FBR-A), reduction of nitrobenzene to aniline (FBR), butadiene from n-butanes (FBR-A), ethylbenzene by alkylation of benzene (FBR), dehydrogenation of ethylbenzene to styrene (FBR), methyl ethyl ketone from sec-butyl alcohol (by dehydrogenation) (FBR), formaldehyde from methanol (FBR), disproportionation of toluene (FBR-A), dehydration of ethanol (FBR-A), dimethylaniline from aniline and methanol (FBR), vinyl chloride from acetone (FBR), vinyl acetate from acetylene and acetic acid (FBR), phosgene from carbon monoxide (FBR), dichloroethane by oxichlorination of ethylene (FBR), oxidation of ethylene to ethylene oxide (FBR), oxidation of benzene to maleic anhydride (FBR), oxidation of toluene to benzaldehyde (FBR), phthalic anhydride from o-xylene (FBR), furane from butadiene (FBR), acrylonitrile by ammoxidation of propylene (FI BR)... 

The most effective molybdenum-based oxide catalyst for propane ammoxidation is the Mo-V-Nb-Te-0 catalyst system discovered and patented by Mitsubishi Chemical Corp., Japan, U.S.A. (140). Under single-pass process conditions, acrylonitrile yields of up to 59% are reported, whereas under recycle process feed conditions, the acrylonitrile selectivity is 62% at 25% propane conversion (141). Although the latter results show that the catalyst operates effectively under recycle feed conditions, the catalyst system was originally disclosed for propane ammoxidation under single-pass process conditions. The catalyst was derived from the Mo-V-Nb-0 catalyst developed by Union Carbide Corp. for the selective oxidation of ethane to ethylene and acetic acid (142). The early work by Mitsubishi Chemical Corp. used tellurium as an additive to the Union Carbide catalyst. The yields of acrylonitrile from propane using this catalyst were around 25% with a selectivity to acrylonitrile of 44% (143). The catalyst was also tested for use in a regenerative process mode much like that developed earlier by Monsanto (144) (see above and Fig. 8). Operation under cyclic reduction/reoxidation conditions revealed that the performance of the catalyst improved when it was partially reduced in the reduction cycle of the process. Selectivity to acrylonitrile reached 67%, albeit with propane conversions of less than 10%, since activity in... 

---