Equilibrium constants transesterification/glycolysis

Esterification, hydrolysis, transesterification and glycolysis have equilibrium constants close to unity and proceed via an AAc2 mechanism (Figure 2.3) [9, 18],... 

In Figure 2.4, data for the equilibrium constants of esterification/hydrolysis and transesterification/glycolysis from different publications [21-24] are compared. In addition, the equilibrium constant data for the reaction TPA + 2EG BHET + 2W, as calculated by a Gibbs reactor model included in the commercial process simulator Chemcad, are also shown. The equilibrium constants for the respective reactions show the same tendency, although the correspondence is not as good as required for a reliable rigorous modelling of the esterification process. The thermodynamic data, as well as the dependency of the equilibrium constants on temperature, indicate that the esterification reactions of the model compounds are moderately endothermic. The transesterification process is a moderately exothermic reaction. 

Transesterification is the main reaction of PET polycondensation in both the melt phase and the solid state. It is the dominant reaction in the second and subsequent stages of PET production, but also occurs to a significant extent during esterification. As mentioned above, polycondensation is an equilibrium reaction and the reverse reaction is glycolysis. The temperature-dependent equilibrium constant of transesterification has already been discussed in Section 2.1. The polycondensation process in the melt phase involves a gas phase and a homogeneous liquid phase, while the SSP process involves a gas phase and two solid phases. The respective phase equilibria, which have to be considered for process modelling, will be discussed below in Section 3.1. 

---