Energy liquid silicone rubber

Extrusion Coating - The use of liquid silicone rubber in coating application requires less energy than conventional dispersion coating processes. Solventless material, rapid cure time, absence of by-products and the elimination of multiple passes all contribute to the reduced energy demand of the liquid polymer system. 

TABLE IV Comparison Of Energy Consumption For Coating Conductive Core With Liquid Silicone Rubber vs Silicone Rubber Dispersion... 

Rheology is concerned with the flow and/or deformation of matter under the influence of externally imposed mechanical forces. Two limiting types of behaviour arc possible. The deformation may reverse spontaneously (relax) when the external force is removed this is called elastic behaviour and is exhibited by rigid solids. The energy used in causing the deformation is stored, and then recovered when the solid relaxes. At the other extreme, matter flows and the flow ceases (but is not reversed) when the force is removed this is called viscous behaviour and is characteristic of simple liquids. The energy needed to maintain the flow is dissipated as heat. Between the two extremes arc systems whose response to an applied force depends on the lime-scale involved. Thus pitch behaves as an elastic solid if struck but flows if left for years on a slope. Similarly, a ball of Funny Putty , a form of silicone rubber, bounces when dropped on a hard surface, when the contact time is a few milliseconds, but flows if deformed slowly on a time-scale of seconds or minutes. Systems of this kind are said to be visco-elastic. The precise nature of the observable phenomena depends on the ratio of the time it takes for the system to relax to the time taken to make an observation. This ratio is called the Deborah number (De) ... 

---