Emission from Gaseous Flames

Lines due to Mg atomic emissions and to emissions from gaseous MgO molecules can also be detected in most yellow flames based on Mg as fuel. 

In atomic spectroscopy, absorption, emission, or fluorescence from gaseous atoms is measured. Liquids may be atomized by a plasma, a furnace, or a flame. Flame temperatures are usually in the range 2 300-3 400 K. The choice of fuel and oxidant determines the temperature of the flame and affects the extent of spectral, chemical, or ionization interference that will be encountered. Temperature instability affects atomization in atomic absorption and has an even larger effect on atomic emission, because the excited-state popula-... 

Introduction Flame radiation originates as a result of emission from water vapor and carbon dioxide in the hot gaseous combustion... 

The last point is worth considering in more detail. Most hydrocarbon diffusion flames are luminous, and this luminosity is due to carbon particulates that radiate strongly at the high combustion gas temperatures. As discussed in Chapter 6, most flames appear yellow when there is particulate formation. The solid-phase particulate cloud has a very high emissivity compared to a pure gaseous system thus, soot-laden flames appreciably increase the radiant heat transfer. In fact, some systems can approach black-body conditions. Thus, when the rate of heat transfer from the combustion gases to some surface, such as a melt, is important—as is the case in certain industrial furnaces—it is beneficial to operate the system in a particular diffusion flame mode to ensure formation of carbon particles. Such particles can later be burned off with additional air to meet emission standards. But some flames are not as luminous as others. Under certain conditions the very small particles that form are oxidized in the flame front and do not create a particulate cloud. 

---