Electrodeposition salt spray test

Resistance to corrosion Most authors who compare resistance to corrosion of electroless nickel with that of electrodeposited nickel conclude that the electroless deposit is the superior material when assessed by salt spray testing, seaside exposure or subjection to nitric acid. Also, resistance to corrosion of electroless nickel is said to increase with increasing phosphorus level. However, unpublished results from International Nickel s Birmingham research laboratory showed that electroless nickel-phosphorus and electrolytic nickel deposits were not significantly different on roof exposure or when compared by polarisation data. 

Ductile and easily buffed chromium deposits having satisfactory corrosion resistance have been produced thus 0.005 mm-thick chromium deposits applied to steel by chemical deposition or by electrodeposition gave similar results when subjected to a salt-spray test... 

A conductive polymer film of polypyrrole doped with polymolybdate anions was electrodeposited onto steel and found to provide corrosion protection in neutral and acidic 3.5% NaCl solution [152]. The anodic codeposition of polypyrrole and Ti02 onto mild steel in an oxalic acid medium has been described [153,154]. The PPy and Ti02 composite showed a considerable improvement in anticorrosion properties with respect to PPy films in salt spray and weight-loss tests. It was suggested that these composite films could be applied as a primary coating replacement for the phosphatized layers on mild steel [154]. 

---