Electrical eliminators

The ELECTRE (ELimination Et Choix Traduisant la REalite) family is the first major family of outranking methods. Individual methods within the family differ with respect to their complexity, the richness of information required and the type of decision situation they can be applied to. ELECTRE I - III are introduced below to illustrate the concept. An intro-... 

Static control devices are made in many different shapes and sizes, so they can be retrofitted to different applications of several different products. They can be classified into four different groups (1) Active AC electrical eliminators, (2) Active electrical DC eliminators, (3) Nuclear, and (4) Passive or grounding devices. Some incorporate air to cany the ions to the part... 

Wlien an electrical coimection is made between two metal surfaces, a contact potential difference arises from the transfer of electrons from the metal of lower work function to the second metal until their Femii levels line up. The difference in contact potential between the two metals is just equal to the difference in their respective work fiinctions. In the absence of an applied emf, there is electric field between two parallel metal plates arranged as a capacitor. If a potential is applied, the field can be eliminated and at this point tire potential equals the contact potential difference of tlie two metal plates. If one plate of known work fiinction is used as a reference electrode, the work function of the second plate can be detennined by measuring tliis applied potential between the plates [ ]. One can detemiine the zero-electric-field condition between the two parallel plates by measuring directly the tendency for charge to flow through the external circuit. This is called the static capacitor method [59]. 

A true baseline output from an ion detector is electrically noisy and, if recorded as such, the noise would appear as a great many small (unwanted) peaks. By creating an artificial baseline at a voltage just above the noise, the small peaks are eliminated and only the desired signal is recorded. It is important not to set the artificial baseline voltage too high, since this would eliminate too much of the required peak. 

Statexan ITA Static control agents Static decay Static decay times Static dissipation Static drying Static electricity Static eliminating devices Static mixers Static phenomena... 

Hydrogen-storage alloys (18,19) are commercially available from several companies in the United States, Japan, and Europe. A commercial use has been developed in rechargeable nickel—metal hydride batteries which are superior to nickel—cadmium batteries by virtue of improved capacity and elimination of the toxic metal cadmium (see BATTERIES, SECONDARYCELLS-ALKALINe). Other uses are expected to develop in nonpolluting internal combustion engines and fuel cells (qv), heat pumps and refrigerators, and electric utility peak-load shaving. 

Transesterification. There has been renewed interest in the transesterification process for preparation of polycarbonate because of the desire to transition technology to environmentally friendly processes. The transesterification process utilizes no solvent during polymerization, producing neat polymer direcdy and thus chlorinated solvents may be entirely eliminated. General Electric operates a polycarbonate plant in Chiba, Japan which produces BPA polycarbonate via this melt process. 

Electrical Properties. Generally, deposited thin films have an electrical resistivity that is higher than that of the bulk material. This is often the result of the lower density and high surface-to-volume ratio in the film. In semiconductor films, the electron mobiHty and lifetime can be affected by the point defect concentration, which also affects electromigration. These effects are eliminated by depositing the film at low rates, high temperatures, and under very controUed conditions, such as are found in molecular beam epitaxy and vapor-phase epitaxy. 

Research-grade material may be prepared by reaction of pelleted mixtures of titanium dioxide and boron at 1700°C in a vacuum furnace. Under these conditions, the oxygen is eliminated as a volatile boron oxide (17). Technical grade (purity > 98%) material may be made by the carbothermal reduction of titanium dioxide in the presence of boron or boron carbide. The endothermic reaction is carried out by heating briquettes made from a mixture of the reactants in electric furnaces at 2000°C (11,18,19). 

---