Flotation systems, electrical double layer

The structure electrical double layer at the silica-aqueous electrolyte interface was one of the earlier examined of the oxide systems. At the beginning the investigations were performed with application of electrokinetic methods next, with potentiometric titrations. The properties of this system were very important for flotation in mineral processing. Measurements proved that pHpZC and pHiep are equal to 3, but presence of some alkaline or acidic contaminants may change the position of these points on pH scale. Few examples, concerning edl parameters are shown in Table 3. Presented data concern a group of systems of different composition of the liquid phase and solid of a different origin. The latest measurements of this system takes into account the kinetics of the silica dissolution [152], and at zeta measurements, also the porosity of dispersed solid [155]. 

In many flotation systems, the electrical nature of the mineral/water interface controls the adsorption of collectors. The flotation behavior of insoluble oxide minerals, for example, is best understood in terms of electrical double-layer phenomena. A very useful tool for the study of these phenomena in mineral/water systems is the measurement of electrokinetic potential, which results from the interrelation between mechanical fluid dynamic forces and interfacial potentials. Two methods most commonly used in flotation chemistry research for evaluation of the electrokinetic potential are electrophoresis and streaming potential. 

---