Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Effective tunneling coupling calculations

The factor k takes into acount the effects of nonadiabatic transition and tunneling properly. Also note that the electronic coupling //ad is assumed to be constant in the Marcus formula, but this is not necessary in the present formulation. The coupling Had cancels out in k of Eq. (126) and the ZN probability can be calculated from the information of adiabatic potentials. [Pg.146]

In 1983, Huskey and Schowen tested the coupled-motion hypothesis and showed it to be inadequate in its purest form to account for the results. If, however, tunneling along the reaction coordinate were included along with coupled motion, then not only was the exaltation of the secondary isotope effects explained but also several other unusual feamres of the data as well. Fig. 4 shows the model used and the results. The calculated equilibrium isotope effect for the NCMH model (the models employed are defined in Fig. 4) was 1.069 (this value fails to agree with the measured value of 1.13 because of the general simplicity of the model and particularly defects in the force field). If the coupled-motion hypothesis were correct, then sufficient coupling, as measured by the secondary/primary reaction-coordinate amplimde ratio should generate secondary isotope effects that... [Pg.41]

The overall conclusion drawn by Huskey and Schowen was that a combination of coupled motion and tunneling through a relatively sharp barrier was required to explain the exaltation of secondary isotope effects. They also noted that this combination predicts that a reduction of exaltation in the secondary effect will occur if the transferring hydrogen is changed from protium to deuterium for point A in Fig. 4, the secondary effect is reduced by a factor of 1.09. Experimentally, reduction factors of 1.03 to 1.14 had been reported. For points B, C, and D on the diagram, all of which lack a combination of coupled motion and tunneling, no such reductions in the secondary isotope effect were calculated. [Pg.43]

Kinetic complexity definition, 43 Klinman s approach, 46 Kinetic isotope effects, 28 for 2,4,6-collidine, 31 a-secondary, 35 and coupled motion, 35, 40 in enzyme-catalyzed reactions, 35 as indicators of quantum tunneling, 70 in multistep enzymatic reactions, 44-45 normal temperature dependence, 37 Northrop notation, 45 Northrop s method of calculation, 55 rule of geometric mean, 36 secondary effects and transition state, 37 semiclassical treatment for hydrogen transfer,... [Pg.340]


See other pages where Effective tunneling coupling calculations is mentioned: [Pg.109]    [Pg.109]    [Pg.450]    [Pg.47]    [Pg.204]    [Pg.473]    [Pg.283]    [Pg.331]    [Pg.12]    [Pg.3100]    [Pg.366]    [Pg.395]    [Pg.379]    [Pg.102]    [Pg.136]    [Pg.168]    [Pg.128]    [Pg.117]    [Pg.225]    [Pg.239]    [Pg.221]    [Pg.333]    [Pg.379]    [Pg.151]    [Pg.167]    [Pg.237]    [Pg.25]    [Pg.27]    [Pg.47]    [Pg.304]    [Pg.695]    [Pg.221]    [Pg.154]    [Pg.230]    [Pg.300]    [Pg.443]    [Pg.632]    [Pg.113]    [Pg.26]    [Pg.5]    [Pg.40]    [Pg.42]    [Pg.472]    [Pg.203]    [Pg.375]    [Pg.377]   
See also in sourсe #XX -- [ Pg.109 ]




SEARCH



Effective coupling

Effective tunneling coupling

Tunnel effect

Tunneling coupling

Tunneling effects

Tunnelling effects

© 2024 chempedia.info