Duplex stainless steels wrought

TABLE 25-12 Standard Wrought Austenitic/Ferritic Duplex Stainless Steels... [Pg.37]

Super Duplex Stainless Steel 9 Wrought/ Forgings A182Gr55 S32760 EN 102504 EN 100883 X2Cr Ni Mo CuWN2S74 1,4501 ... [Pg.149]

Susceptibility of duplex stainless steels to formation of undesirable intermetallic phases is typically done using ASTM A 923 (Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels). The application of ASTM A 923 to testing of weldments is recommended in TAPPI TIP 0402-29 [196]. [Pg.803]

The duplex range of stainless steels can be readily cast, wrought and machined. Problems can occur in welding, due to the need to keep the correct balance of ferrite and austenite in the weld area, but this can be overcome using the correct welding materials and procedures. [Pg.298]

Stainless steels are the most widely used alloys for heat and corrosion resistance and low temperature toughness. Wrought stainless steels are named for their metallurgical structure martensitic, ferritic, austenitic, duplex, and precipitation hardening. Cast stainless steels groups are heat resistant and corrosion resistant. [Pg.81]

ASTM Standard A 923, Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austen-itic/Ferric Stainless Steels, Annual Book of ASTM Standards, Vol. 03.02, ASTM International, West Conshohocken, PA. [Pg.794]

Big Chemical Encyclopedia