Doped polymer light-emitting devices

Doped Polymer Light-Emitting Devices and Sensors for Volatile Organic Compounds... 

S Kan, X Liu, F Shen, J Zhang, Y Ma, Y Wang, and J Shen, Improved efficiency of single-layer polymer light-emitting devices with poly(vinylcarbazole) doubly doped with phosphorescent and fluorescent dyes as the emitting layer, Adv. Funct. Mater., 13 603-608, 2003. 

F Shen, H Xia, C Zhang, D Lin, X Liu, and Y Ma, Spectral investigation for phosphorescent polymer light-emitting devices with doubly doped phosphorescent dyes, Appl. Phys. Lett., 84 55-57,... 

Y Noh, C Lee, J Kim, and K Yase, Energy transfer and device performance in phosphorescent dye doped polymer light emitting diodes, J. Chem. Phys., 118 2853-2864, 2003. 

Hebner, T. Wu, G Marcy, D. Lu, M. Sturm, J. 1998. Ink-jet printing of doped polymers for organic light emitting devices. Appl. Phys. Lett. 72 519-521. 

C Lee, KB Lee, and J Kim, Polymer phosphorescent light-emitting devices doped with tris (2-phenylpyridine) iridium as a triplet emitter, Appl. Phys. Lett., 77 2280-2282, 2000. 

Y Kawamura, S Yanagida, and SR Forrest, Energy transfer in polymer electrophosphorescent light emitting devices with single and multiple doped luminescent layers, J. Appl. Phys., 92 87-93,... 

Rhenium(I) tricarbonyl-2,2 -bipyridine moieties were used to cap both ends of a poly fluorine, yielding Re-capped Re(bpy)(CO)3(py)-X-(py)(CO)3(bpy)Re 2+ polymers, where X = polyfluorene [51, 52], The polymers with and without the Re caps were spin-coated from their solutions in CH2C12 onto an ITO surface previously modified with a layer of poly(styrene sulfonic acid), doped with poly(ethylenedioxythiophene). The LED (light-emitting device) was then topped with a layer of Ca/Al. The photoluminescence (PL) and electroluminescence seen were consistent with the presence of [Re(bpy)(CO)3(py)]+ [158],... 

Tanaka, M. Suzuki, and S. Tokito. White fight emission from polymer electrophosphorescent light-emitting devices doped with iridium complexes. Jpn. J. Appl. Phys., Part 1,42(5A) 2737-2740, May 2003. 

---