Dispersive TRIR spectroscopy

Although very detailed, fundamental information is available from ultrafast TRIR methods, significant expertise in femtosecond/picosecond spectroscopy is required to conduct such experiments. TRIR spectroscopy on the nanosecond or slower timescale is a more straightforward experiment. Here, mainly two alternatives exist step-scan FTIR spectroscopy and conventional pump-probe dispersive TRIR spectroscopy, each with their own strengths and weaknesses. Commercial instruments for each of these approaches are currently available. 

Experimental limitations initially limited the types of molecular systems that could be studied by TRIR spectroscopy. The main obstacles were the lack of readily tunable intense IR sources and sensitive fast IR detectors. Early TRIR work focused on gas phase studies because long pathlengths and/or multipass cells could be used without interference from solvent IR bands. Pimentel and co-workers first developed a rapid scan dispersive IR spectrometer (using a carbon arc broadband IR source) with time and spectral resolution on the order of 10 ps and 1 cm , respectively, and reported the gas phase IR spectra of a number of fundamental organic intermediates (e.g., CH3, CD3, and Cp2). Subsequent gas phase approaches with improved time and spectral resolution took advantage of pulsed IR sources. 

Since modern FTIR spectrometers can operate in a rapid scan mode with approximately 50 ms time resolution, TRIR experiments in the millisecond time regime are readily available. Recent advances in ultra-rapid scanning FTIR spectroscopy have improved the obtainable time resolution to 5 ms. Alternatively, experiments can be performed at time resolutions on the order of 1-10 ms with the planar array IR technique, which utilizes a spectrograph for wavelength dispersion and an IR focal plane detector for simultaneous detection of multiple wavelengths. ... 

---